awkwardbob

Well-Known Member
Hi,

just a thought from left field but, as some parts are becoming harder (or impossible) to source, I was considering 3D printing some of these.

has anyone tried this with this part ? Or if I go ahead and CAD the thing up would anyone else be interested in them ?

Just think it might be a possible solution to the ‘obsolete parts’ issue which I’m coming across a fair bit.

cheers

Bob
 
Land Rover classics department are starting to cater to NLA items.

As for the windscreen clips, I bought some off ebay quite easily.
 
I would be interested to try some. They will need to have enough strength & flexibility for the 4 way spider side to stay in place in the trim, but still allow them to be slid into place. How does printing plastic stand up the repeated cold nights & heating in the sun ?

Most LR parts suppliers list them as no longer available, although island-4x4 site says POA.
 
I would be interested to try some. They will need to have enough strength & flexibility for the 4 way spider side to stay in place in the trim, but still allow them to be slid into place. How does printing plastic stand up the repeated cold nights & heating in the sun ?

Most LR parts suppliers list them as no longer available, although island-4x4 site says POA.

Yeah, I think a bit of trial and error with the materials to get the right combination of strength and flexibility will be needed.

I know these seem like a fairly trivial piece but there will be others and it seems like a good place to start.

I’ll try some and see how they go.
 
Not sure how accurate the scanning process is, but you might need to scan several examples to get a good size, especially if the prongs are bent slightly.
 
I was looking for someone with a printer, I know nothing about 3D printing, but the plastic looks brittle to me, you need a plastic like oily and with a bit of flex in it, or they will break and snap in the cold weather, something like a PVC
 
They are definitely getting a lot better than the first lot that came along and more reliable
 
They are definitely getting a lot better than the first lot that came along and more reliable

yeah, it’s a strange mix of properties, it needs to be flexible but with enough rigidity to latch in the channel.
I was thinking TPE but that may be too bendy. A bit of trial and error required
 
I looked into it a few years agi, got as far as going to a 3D specialist, but the scan and set up was going to cost 60/70 pounds plus mats. I figure the material is a kind of polythene, like a walls ice cream tub
 
I managed to get brand new old stock from Belgium, the spare ones I have appear to be nylon. I was going to draw up the CAD file and buy a printer, havent got to it yet. As they are brand new measuring them for drawing is easy and accurate.
 
I managed to get brand new old stock from Belgium, the spare ones I have appear to be nylon. I was going to draw up the CAD file and buy a printer, havent got to it yet. As they are brand new measuring them for drawing is easy and accurate.
Nice!

don’t suppose you have a link to the store do you ?

I took pictures and started to draw them
In CAD but a house move has shaken things up a wee bit ! -need to get back on it
 
Just thought I would wander tinternet and found one for sale on EBay, (Green oval spares)
Only £22:95 for 1......... What a deal,
I paid about £10:00 for 20 odd, I am sitting on a bloody fortune :)
 

Similar threads