jdunkers

New Member

• Dec 29, 2010

• #1

hi fellas. my driver side widow reg broke yesterday sounds like the wires are all frayed.has anyone used the repair kit they sell on ebay.i dont want to spend £20 on a repair kit and find out there crap or should i just replace the reg for £80,,,cheers

 

Hippo

Lord Hippo

• Dec 29, 2010

• #2

There's a "how to" replace the cables over here: http://www.landyzone.co.uk/lz/f38/freelander-window-mechanism-repair-121968.html

 

Matt_TD4

New Member

• Dec 29, 2010

• #3

I broke 2 of those repair kits before giving up and buying the whole regulator. Not worth the hassle in my opinion.

 

freelander2002

Active Member

• Dec 29, 2010

• #4

Yeah me to, bought one but it didn't wind on the spool properly so wasted my time and 20 quid. Think I'll be buying the whole thing off eBay for 60 quid. Whole lit easier

 

R

richardn

New Member

• Dec 29, 2010

• #5

I bought the repair kit to find that a nylon wheel had seized. The complete regulator is only £60 on ebay

 

B

banker

New Member

• Dec 29, 2010

• #6

Ditto, bought a kit and gave up with it. Complete unit off e-bay far less hassle to fit and cheap enough.

 

mick 1986

Well-Known Member

• Dec 29, 2010

• #7

richardn said:

I bought the repair kit to find that a nylon wheel had seized. The complete regulator is only £60 on ebay

Click to expand...

Does the regulator come with cables aswell?

 

Matt_TD4

New Member

• Dec 29, 2010

• #8

The regulator is a complete unit. Bolt off, bolt on jobby. Takes about 10 mins tops.

 

jdunkers

New Member

• Dec 29, 2010

• #9

cheers guys for the advice,new one on the way after new year...

 

jdunkers

New Member

• Jan 10, 2011

• #10

fitted today,result

 

OldIrishWulf

Well-Known Member

• Jan 10, 2011

• #11

jdunkers said:

fitted today,result

Click to expand...

Next time carefully remove the regulator,so you know what goes where.Source new wire measure and allow 10mm either end.I tried to remove the broken wire by heating,no joy ,so I drilled it out with a 3mm iirc.Then pushed the cable through the casings and other parts.

Once the end bits are on frey the ends and dab on some flux and sweat in some solder.
Cost c.€1.50.
You will most likely have to fix another cable again sometime.