johnd

New Member
hi, my p38 has just started showing a "window not set" warning on the dash.
When you put the drivers window up as it gets to the top it doesn't stop it just makes a loud clicking noise, the window stops going up but sounds like the motor keeps going, also since this started the window auto up/down don't work.
Does anyone know what this could be?
All help will be appreciated
 
That's most likely the window regulator given up. Quite sommon especially on drivers window as its the one most used. The plastic cogs will be stripped. Easily fixed, though. Plenty s/h regulators (motors) in breakers. Then you'll need to re-set the window by opening it fully then rocking the switch into the up position, wait till it closes, hold the button in the up position until you hear the beep and it says "window set". Easy!!
 
Had a similar experience.... drivers glass would go so far and slow down before sticking and shooting back down with the LCD dash display bleeping 'anti trap off' at me...... new regulator sorted the problem!!!
 

Similar threads