Just found a quote off ebay about the kit
This is like no other on the market, this is literally every part that is used to glaze your door top including all of the channels and the aluminium fixing/spacing panels. It even includes the rubber seal that goes upright on the sliding piece of glass that seals the 2 glass panes as they slide to stop that draft! The curved aluminium piece that clamps this onto the glass is also included.
Also comes with the all important screws, 10 taper had ones for the channel and 5 dome headed ones for the aluminum retainer for the fixed pane of glass.
The channel itself is cut to the right length to fit your door top and the longer piece has the hole punched out to allow the plastic sliding latch to pop through. No other channel comes with this feature. With other channel on the market you have cut this out yourself which very rarely ends up with a neat result!
These are used to glaze brand new door tops so they are top quality and a perfect fit. All made in the UK.
Usually the glass in your old door top is still very useable but this is what makes new glazed door tops a lot more expensive than unglazed units. Buying our new door tops and this fitting kit gives you an “out of the factory” end result.