J

Jamie1987

New Member
Hey everyone.

So the drivers seat in my 3dr disco is nakered, it's collapsed at the back so it drops right down where your ass sits and it won't extend right forward, so at present my dad can't drive it as he is a bit shorter than me and its bloody uncomfortable.

Does anyone know if the seat from 5dr and 3dr Disco 1 is exchangeable? I know the subframe on my seat is different as it tilts forward being 3dr, but would a seat from another 5dr disco 1 fit on my frame?

Thanks,
Jamie.
 
It might fit but I think you could fail the MOT because of it
Doesn't the 3 door seat slide forward and hinge to allow access to rear seats?
The 5 door seat only has slide and rake adjustment
 
Hey

I Don't want to change the whole seat and frame to a 5dr one, it's the frame on the 3dr that tilts/slides the chair forward to enable passengers access to the back. So I am hoping to change just the chair, so if I can separate a chair from a 5dr seat frame will that then fit on my 3dr seat frame.

Just seems to be a lack of 3dr discos about so wanted to see if a 5dr seat, but not the frame will work :)
 
Yes it'll work just remember that 300tdi's are wider than 200Tdi's so either get the same or be prepared to source a flat metal plate and drill out a few holes to make the conversion work.
 
You must log in or register to reply here.

Similar threads

S
Disco 1 Disco 1 Rust repair prep
2
Replies
20
Views
1K
sv_dOnut
S
dag019
I have bought a station wagon
4 5 6
Replies
107
Views
7K
Hicap phill
H
enjoi
P38A Down on power when warmed up
2
Replies
31
Views
3K
enjoi
enjoi
X
Tub sits high at back after new A frame cross member
Replies
11
Views
2K
tottot
tottot
karlp606
Found some random spade connections under the drivers seat
Replies
7
Views
794
karlp606
karlp606