Sounds like a reasonable list,
Lots of common issues, what Maf will you get? Bosch or the pieberg straight swap?
Looking forward to engine mod!
 
Sounds like a reasonable list,
Lots of common issues, what Maf will you get? Bosch or the pieberg straight swap?
Looking forward to engine mod!

Don't know yet. I got spare MAF , will fit it and see how it work, i got boost solenoid on list to check too.
Pebble have low performance on lower rev range up to 2000 - then is a kick and it accelerate as it should. Starting from MAF, if not help, check solenoid for VVC.

Also need to wash it properly:

2014-09-2011.23.45.jpg


Top of rocker cover is dirty with oil
2014-09-2011.24.02.jpg


2014-09-2011.24.49.jpg


The reason is probably clogged engine breather. Will swap it for cyclone BMW version.

here he got a small fuel leak:
2014-09-2011.25.16.jpg


and some crap on boost pipe:
2014-09-2011.26.11.jpg


There is a lot of mud, dirt everywhere - bleh, half day of washing and cleaning.
 
Looks like the MAP sensor has been removed, if it had one? That bit of blue pipe looks wrong!!
 
It have it on side of intake manifold in this MY, MAP on pipe are present in facelift ones :)

Yep air pipe is... VEEEERY DIY :censored:
 
Put my hands into engine... it still works :D

2014-09-2215.32.22.jpg


After intake manifold remove :eek:
IMG_1285.jpg

A little dirty one...

All is cleaned up now, no photo for now as I finish after dusk...
Few things to do:
-Injector washers
-Injector loom
-Spill return pipes
-Thermostat
-New battery as somebody put dying 68 Ah

Starts up fine
IMG 1273 - YouTube

Tailgate need to be replaced, as rust under handle "eat it" badly
 
Not bad price! Does yours have the webasto fuel burner? If so the bumper fogs won't fit (as far as I'm aware)
 
Hi Winu

read a lot of your threads - a real Freelander guy :):)

what are you going to use to reach 150 HP ?
the engine is good for this power as that's what it gives in a BMW

thanks and good luck
 
Hmmm? :boink: :D

New wheels for 3dr

10550892_10202696931253513_632753771173216857_n.jpg


Land Rovers' 17 inch Trek in chrome ;)
 
Last edited:
When fitted and fished those will have a little less shine... but still bling :D

Should looks about like this:
1798553_658548890874636_87521102_n.jpg


Because I don't give them to galvanisation
 
Gotta admit I hate chrome infact I dispise it even on my old spitfire I used to have totally hated it, if I had a chance in the future I'd Nickel plate over chrome every time ( saw it on american chopper once) looks loads better..
 
This is not a true chrome (in definition), this is a paint job ;) , always can change it. But want to check how it will be look with bling on a-bar, outer part of side steps and on wheels ;D
 

Similar threads