robhtid
Well-Known Member
Perfect this is good to hear and pretty much exactly what I was thinking although the washer simpler!
There is arround 3-4mm of thread after the nut and I wanted it as strong as possible hense the idea with the 4mm plate.
The axle thankfully looks fine its just the bracket. If I can find a substantial enough washer I'll do you you guys have but add a couple of tabs to the bracket to make sure no further movement occurs.
Thanks again both of you, I'll sleep easier tonight knowing I have a tried and tested way out!
There is arround 3-4mm of thread after the nut and I wanted it as strong as possible hense the idea with the 4mm plate.
The axle thankfully looks fine its just the bracket. If I can find a substantial enough washer I'll do you you guys have but add a couple of tabs to the bracket to make sure no further movement occurs.
Thanks again both of you, I'll sleep easier tonight knowing I have a tried and tested way out!
