S

steve52

New Member

• Feb 21, 2007

• #1

hi everyone - where can i get some replacement clips to put my wheel arch plastics back on? I butchered mine taking them off to remove front wing and cant find them on craddocks/paddocks etc
thanks steve

 

landroversforever

Active Member

• Feb 21, 2007

• #2

you mean the ones with the puck out rod in the centre? try you local landy specialist, they should have some, there an arse when you loose the middle stick bit!

 

D

discomania

Well-Known Member

• Feb 21, 2007

• #3

You can get the clips from most places, they are used in lots of things other than landys, check out the size of the hole and get clips to suit. I don't know the name of them, but if someone does, its then just the case of googling them, or look on ebay.

Or you could get the hex rivets, they are rivets but once in place can be un-screwed by a little hex head.

 

nobber

Well-Known Member

• Feb 21, 2007

• #4

craddocks sell them , they are AFU1075 , 22p each???
32 for the front and 22 for the back. i think thats each wheel but you might want to check first.

 

Bradj999

New Member

• Feb 21, 2007

• #5

I've just done some body work to mine and like you broke most of the clips, I used 10mm short self tapping bolts to good effect. They are easy to remove and reuse in the future if you have to get behind there again

 

woods767

Well-Known Member

• Feb 21, 2007

• #6

What are u lot on about? Just bolt the things on then they dont fall off when u lean on them or whatever.

Richard.

 

0

007

New Member

• Feb 21, 2007

• #7

look at ebay hear is the item number dont bolt on do things properly (300056903515 )

 

S

steve52

New Member

• Feb 22, 2007

• #8

Thanks everyone