ade1703 · Nov 16, 2018

So I've been chasing out my heating problems and came across this wiring issue. At some point in the past the blower wiring has been "modified" and I'd like to put it back to how it should be.
What I don't know is what this connector is called and how it is supposed to be wired up. As you can see on the pic one half has been filled up with a black mastic and wrapped in electricians tape.

Kwakerman · Nov 16, 2018

ade1703 said:
So I've been chasing out my heating problems and came across this wiring issue. At some point in the past the blower wiring has been "modified" and I'd like to put it back to how it should be.
What I don't know is what this connector is called and how it is supposed to be wired up. As you can see on the pic one half has been filled up with a black mastic and wrapped in electricians tape.

View attachment 162905

If these colours match it may be connector C0056? That is assuming the blower motor has a flylead coming off it

ade1703 · Nov 16, 2018

Thanks, having looked up the part number you quoted I'd say that you are right.. I'll try and buy one and put it right.

ade1703 · Nov 18, 2018

Managed to salvage the connector, clearing out the mastic and doing a bit of an interim connection on the wiring.(my soldering was so shocking I had to resort to a crimped connector)
I've tightened up the connector since I took the picture so its now properly closed up..
however the Heater now blowing but at one speed regardless of what setting the slider is in.

ade1703

Member

Kwakerman

Well-Known Member

Attachments

ade1703

Member

ade1703

Member

Similar threads