It's a Diesel runaway.

Usually caused by the Turbo seals going sucking the oil from the sump through the engine. The engine just runs to destruction.
 
So is there general maintenance that should be done to the turbo to prevent it? Always been wary of messing about with them :( heard some horrors of them breaking an bits going into engine an knackin it but never this.
 
We had a daf 85 do it where I work they put it down to the fact that the driver thrashed it from cold and instant shutdown when he stopped
 
Auldgreen90 said:
This link was interesting Brian thanks for that. Plan to have fire extinguisher in mine when I finally get it back on the road. Every days a schooday :D
Click to expand...


Hows that gonna work then - apart from filling the engine with water/foam/dry powder (take yo pick)?
 
AliV said:
I would imagine he means a CO2 extinguisher, no oxygen = no combustion.
Click to expand...

big sharp knife would be better -
cut the output from the turbo to inlet manifold = no air or oil going in then,
just to make sure stuff a lump of rag in the inlet pronto.



but by then the motor would be fooked anyway....:rolleyes:
 
easye1 said:
big sharp knife would be better -
cut the output from the turbo to inlet manifold = no air or oil going in then,
just to make sure stuff a lump of rag in the inlet pronto.



but by then the motor would be fooked anyway....:rolleyes:
Click to expand...

I would go with the rag option myself.
 
Silverlandy said:
I wouldn't know what to do.

Sharp exit probably :(
Click to expand...

lol.....my mrs would say she never done it,:rolleyes:
my eldist daughter would try and stall it,:rolleyes:
my youngist daughter would get out, slam the door and say (feckit) its not mine anyway...:D
my son would run a mile with all the smoke billowing - hates smoke =
serious house fire when he was just 4 yo..
but laugh at it till it went pop...:D:D:D


but they ALL would say,
bout time you got rid of that and bought a new one.. :(
 
Don't overfill the engine oil - had a work colleague who had an oil level sensor failure on a Seat, light came on, didn't check the dipstick, just poured a litre of oil in the engine. Started it up and it lunched itself. Seat weren't very helpful.......
 
You must log in or register to reply here.

Similar threads

Andy Warren
Disco 2 Oil baffle N/S wing to inner wing
Replies
2
Views
669
Andy Warren
Andy Warren
JIMBOB LR
Less Is More. The LR Series lives on.
2 3
Replies
40
Views
4K
steve2286w
steve2286w
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
175
xDParis64
xDParis64
C
Disco 3 (LR3) Rear Air Suspension Raising & Lowering, Valve % Mismatch
Replies
15
Views
3K
gstuart
gstuart
Blob
L322 Solved - C1A13-64 (AF) Pressure does not decrease when venting gallery
Replies
2
Views
2K
stuu
stuu