sprie

Active Member
I don’t want to do any re-painting on the exterior panels of the car – partly as I am so bad at it. The panels have the usual bumps, dents, and scrapes (see photo), but I am hoping I can do something which makes it look better but also retaining the original patina.

With a “normal” car, I would
  1. clean it with a pressure washer and brush.
  2. clay it to get rid of the ingrained dirt.
  3. use a DA polisher to apply compound and then a wax and polish.
Is this what I should do with my Landy paintwork?
 

Attachments

  • 20230818_091029.jpg
    20230818_091029.jpg
    267.1 KB · Views: 134
Found the make I used, Owatrol.
For the life of me cannot remember which of their many products it was!
 
Wash it and leave it alone.
Or if you want it to shine a bit I imagine just about any polish and then wax will do.
Best not to worry to much, that look alot more in keeping than a newly restored trailer queen.
 
I don’t want to do any re-painting on the exterior panels of the car – partly as I am so bad at it. The panels have the usual bumps, dents, and scrapes (see photo), but I am hoping I can do something which makes it look better but also retaining the original patina.

With a “normal” car, I would
  1. clean it with a pressure washer and brush.
  2. clay it to get rid of the ingrained dirt.
  3. use a DA polisher to apply compound and then a wax and polish.
Is this what I should do with my Landy paintwork?
You could just wash it and polish it up with any waxy polish.

Or if you want to, you could wash it, paint it with etch primer, and go over it with Tractol enamel, bronze green.
Or you could just paint it with the Tractol enamel, most of it will probably stay on.
 
I think you have 3 options.
A full professional respray
A bodged home respray
Leave well alone, washing and waxing if you must.
It's all down to personal choice 👍
At the end of the day, old knackered paint work is still old knackered paint work with or without polish/wax.
 

Similar threads