i noticed a small vibration at speed(ha!)this week becoming a little more noticable....so today i thought id have a look and see,then i thought id change the oil/filter whilst i had a day to myself,so with mr shells finest in the sump it was time to source the vibration...tyre pressures all ok,the tyres arent long fitted so they were ok...then i noticed the front off side tyre hadnt any balance weights...so down to the local tyre man(he isnt actually made of rubber!)and he had it up in the air within minutes...wheel off and away he went to his machine leaving me free to have a poke around underneath the LR owners do when given the chance
The obvious quick check on brake pad wear was followed by a poke at bits of 'bala4x4'mud that the jetwash had missed....then i saw it...a big damp patch on the damper...yip,ive a damp damper!!!!
So...do i renew just the fronts...or all four...then i may as well renew the springs whilst im there...so it'd be silly not to do the bushes whilst everything is off...where do i start/stop? a full suspension rebuild or simply replace the front dampers? decisions,decisions
 
The Mad Hat Man said:
Bastid foohickin sodding landrovers............

went out this morning (well 11:00 acterlee) - full of the joys of spring.
Going to put the final coat of hammerite on the inner wing.
opened a 1 litre tin, climbed into the injun bay and nocked the bastid thing over.....
allover the radiator, winch, bumper, noo concrete.
spent 15 mins trying to recover it, wiping up the concrete etc.
Only to turn around and knock the ****in thing over agin.
another half hour later, coming out from the house after cleaning myself down, blurry trip over a bastid step, fall flat on my face and graze my left shin.
(the air was a bit blue)
consoled myself with a jam donut, had lunch and did an hours electrics.

managed to save 250ml of hammerite - but the nice noo concrete wont rust :(
Click to expand...


:rofl:

:doh:
 
half the day spent trying to get 675 litres of veg oil of a tail lift luton,
did it, messy though, ten litres went down my mates front.
but so much for the economics, had to hire truck for another day, buy 4 more 25 litre containers and hire a pallet truck,
it was so much simpler yesterday, when it was loaded on with a jcb tractor /digger .
No foresight, insight or hindsight but hey ho, job done.
 
Beast o Bodmin said:
least ya didnee dribble the jam donut down ya tie...
Click to expand...


nah - made sure of that.;) - and yo rite, G-spot - preparation....

redpelicanbib1_bhlz.jpg
 
Welded Ruby's front inner wings...

Before...

p1010272do2.th.jpg
p1010276fm7.th.jpg


Mid Operation..

p1010274fy5.th.jpg
p1010273uq9.th.jpg


All Zipped Up...

p1010279ns3.th.jpg
p1010281ol3.th.jpg


hopefully nothing else needed for the MOT now.
 
Sorry, I laughed hysterically at this one, go for it Mad Hat Man... Did you get paint on the Donut?

"Originally Posted by The Mad Hat Man
Bastid foohickin sodding landrovers............

went out this morning (well 11:00 acterlee) - full of the joys of spring.
Going to put the final coat of hammerite on the inner wing.
opened a 1 litre tin, climbed into the injun bay and nocked the bastid thing over.....
allover the radiator, winch, bumper, noo concrete.
spent 15 mins trying to recover it, wiping up the concrete etc.
Only to turn around and knock the ****in thing over agin.
another half hour later, coming out from the house after cleaning myself down, blurry trip over a bastid step, fall flat on my face and graze my left shin.
(the air was a bit blue)
consoled myself with a jam donut, had lunch and did an hours electrics.

managed to save 250ml of hammerite - but the nice noo concrete wont rust "

Finished off fitting my subwoofer and speaker wiring today as I just bodged it in last time, she's lookin smooth now. :)
 
well i dint do much other than go 2 a auction 2day and did rather well well i recon i did was gd fun sorry i been away guys me mother has jus had an oporation
 
jimbot90 said:
wot ya bought then?
Click to expand...

well i got 2 huge 20 ton trolly jacks bout 6 feet long both long reach for lorrys 4 25 quid a box of winch bits and accecories bout 10 hand winches and new cable and all sorts for 30squid then 68 4ft long blocks of cedar for turning for 35 n a chain hoist 4 ton for 3o sqid again wich i thought was rather good goin the jacks were a steal tho
 
What sort of hand winches? Anything like Tirfors, or good/heavy enough for off-roading, and if they are, are you selling any?

Piccies??
 
a boatyard sold up and they had a huge auction for everything in the workshops outbuildings eveything one guy left with 8 1.5 bmc's complete for £200 could more for srap value was a rearlly good day out
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
649
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
931
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
603
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I