Put series doors on using Defender catches, just moved them down the post to match series door locks :)
 

Attachments

  • Doors on 90 012.jpg
    Doors on 90 012.jpg
    327.2 KB · Views: 127
  • Doors on 90 005.jpg
    Doors on 90 005.jpg
    322.9 KB · Views: 127
  • Doors on 90 010.jpg
    Doors on 90 010.jpg
    314.3 KB · Views: 151
Replaced the door sill button catch thingy. And fighting with the washer jet :mad:. Sonn gonna be putting the stud catches on the door cards, so they're no longer screwed on through the door card.
 
Fitted a 664 battery from a tractor to my disco to cure cold starting problem

had to cut out the aircon pipes and bracket out from next to the battery but she now starts like a dream ;)
 
took the passenger side rear mudflap bracket off to stop it vibrating against the exhaust after laning with 7.50x16s attacked my standard arches. this weekend will hopefully se a camal cut and the mudflap bracket reattached
 
Just about to venture out and start stripping the toys out of it, CB, 2m/70cm Radio, cd player, invertor 2nd battery & 2nd fusebox, Cubby box, etc etc Figure it'll save me some time, when I start the full stripdown in the noo year.
 
removed

CB,
Ham Radio
CD/Radio
Homemade centre dash console.
Netbook mount & Netbook
Inverter
2nd Battery & relays switch over etc.
Dog gaurd
Rear shelf & speakers
Loads of wiring
Spare wheel
HI Lift
Swingaway carrier
Soundproofing from load area.
Handsfree phone kit.
Rear work lamps
CB & HAm radio antennas

Think that's it for now.. :D Saved a couple of hours When I start the complete strip prior to the rebuild next year.
 
Fitted 50mm lifting blocks to the front today, ran out of time and daylight so the rear will had to wait until next weekend.

Why is it that small easy jobs take so long in the could weather :(
 
Driven it trialled it need a few more bits offset rims for the front, and another pair of diamonds

But happy that it performed great!! Just wish I was on better form picked up some silly points well Stutab inhinknhe came out on top of us three and killajoules was a good day!!
 
Sprayed new arches, mirrors, surrounds, and light guards not long till its all sprayed up.
 

Attachments

  • 20141213_153529.jpg
    20141213_153529.jpg
    377.4 KB · Views: 132
fitted new rear bumper and got the passenger doors working properly. damn lock springs. then fund my mate a spare door handle as he snapped his and then found that his lock spring had died aswell so had to pull one out of a spare mech to sort his aswell. still didn't get the mudflap bracket back on or the camel cut done so they are still on the list to be done. give me something to tinker with during xmas.
 
New HD steering arms and track rod ends, rebuilt the clutch master, re-timed the injection pump, found a loose bolt where the rollbar attaches to the chassis, I was sooo happy with the improveed handling and ride, now the reversing lights are stuck on \.......sigh................
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
480
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
578
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
840
Knappster
Knappster
Mooky
Replacing thermostat
Replies
8
Views
257
Forrest Gump
F
I
Re-coding of ABS Module after repacement
Replies
10
Views
923
invisible999
I