I was going to be productive but its ****ing it down and I just cant be arsed welding in the rain today.....

Dismantling a gearbox instead and later I'll make a start on the transfer box adaptor plate
 
Made a pedal lock for the Defender :)


IMG_1261.jpg
 
I was going to be productive but its ****ing it down and I just cant be arsed welding in the rain today.....

Dismantling a gearbox instead and later I'll make a start on the transfer box adaptor plate

Lazy fooker.. I fitted and welded ma snorkel today!
 
Sorted the cold starting problem on the 300 tdi auto. On cold mornings it would almost catch, but just not quite, often taking several attempts (8 attempts on Wednesday morning) of several seconds of starting before it would eventually catch, after that it would be fine and start on the button....... until the next morning, the colder it got the worse it was to start.

Spent a lot of time reading about folk with the same problem, here n elsewhere and then wasted a fair bit time and money fixing stuff which wasn't broken, which (of course) made no difference to the problem. Glow plugs, lift pump, leak off pipes, erg blanking, de-cat, earth straps etc. Even tried disconnecting then bridging the engine coolant sensor plug with a resistor, but nothing made any difference.

This thread seemed to make sense (timings out, so advance the pump 2 or 3mm). So we gave it a go yesterday. Except the pump was already advanced as far as it would go, so after some head scratching we decided that the pump must be one tooth out, which perhaps explained why it had been advanced to the limit by someone previously. When we changed the timing belt six months ago we was very pedantic about making sure it was all lined up in the same was the old belt, using pins to lock everything down. Anyway belt off, pump advanced one tooth, belt back on, some more head scratching & jiggery pokery adjusting the pump back to where it was plus about 3mm clock wise.

The transformation was immediate, more power &using less fuel....... and then joy of joys it started first turn of the key this morning. First turn.... astonishing.
 
Are you sure it is actually leaking in? I thought the same then realised is was condensation.... There was absolutely loads of water which I assumed was more than would happen through condensation but it has been fixed with insulation.


Ok. Will have a check.

Thanks.

Sam
 
This is what it looks like inside.
yre9a7y5.jpg


ehezu9u8.jpg


dabe3umy.jpg


That going to happen from condensation?!? Weird think is the roof has no water coming in as the tarp is covering all inc the alpine windows... Maybe that is residue. Just don't know.

S.
 
I went to do some welding, got rained off and ended up measuring up for the central crossmember

Will do the LT230 side of the adaptor tonight too
 
Got a few jobs done today before going back to work tomorrow.

  • Adjusted handbrake
  • Replaced rear ARB drop links
  • Removed tow bar and rear step so that some chassis rot can be plated before it takes hold
  • Tracked down the source of my soggy passenger carpet to the left hand edge of the windscreen debonded.
  • Removed said soggy carpet so it can dry out.

Luckily my leaky windscreen just happened to pick up a chip/crack today so autoglass are coming out to replace it on Tuesday :)
 

Similar threads