I walked past mine twice. I did contemplate doing some work on it but then I decided to go to bed instead.
 
Took it out to pick up some willow, then it wouldn't start :doh: Got it going half an hour later and the i took it home!
 
The 'tyre place' fitted my winter tyres and wheels on for me today. I had booked it all in advance and had taken the wheels to them a few weeks ago, so it was a very quick job.

Thanks to all the people who offered advice to me a couple of months ago about which tyres to go for - it was acted upon!
 
Got my car back from the garage as they were giving a good going over, all new oils and fluids, filters, fan belt, hubs all greased and all that jazz.

Completely surprised at what a massive difference it has made, everything feels so much lighter and more responsive, it must have been long overdue.
 
got my new mantec snorkel 2 my disco, and new rear sprigs, all tought they were 2cm too short, so i have 2 fabricate plates under rear springs....
 
got my new mantec snorkel 2 my disco, and new rear sprigs, all tought they were 2cm too short, so i have 2 fabricate plates under rear springs....


Confused?? how can a set of Landrover springs be 20mm short?? Have you got a lift kit fitted??
 
Today I cut off the rear nearside outrigger from my project S3 and welded the new one on. I then cut off the body support bracket, cleaned it up then welded it on to the top of it. Welds all dressed up. Then cut out the rusty bits on the rear nearside of the chassis, ready to weld new metal and box it in like I done on the other side. To ensure the outrigger bracket that supports the rear tub fits correctly, I had fitted a long bit of angle iron, which I bolted to the brackets on either side and spot welded it to the centre supports. Body should fit without too much hassle, I hope.
 
installed a cabin light in the bobtail, and insert decibel insert...still sounds good but much less like a diesel when it's on idle now. Ready to break it at Tong next weekend. Happy days :)
 
Fitted the Raptor dash cover and a LED internal light.
 

Attachments

  • DSCN3310.JPG
    DSCN3310.JPG
    226.8 KB · Views: 457
  • DSCN3316.JPG
    DSCN3316.JPG
    256.7 KB · Views: 205
  • DSCN3317.JPG
    DSCN3317.JPG
    146.2 KB · Views: 183
  • DSCN3319.JPG
    DSCN3319.JPG
    231.2 KB · Views: 178
Yesterday I used mine for two jobs at work. The first being retreiving a mondeo with a burnt out clutch from down the bottom of a long, steep, slippery driveway, The second was a mercedes which had come off the road and into a ditch.

Today I had to jump in it twice again. The first was a citroen piccasso that had taken a wrong turn down a steel bridlepath, The second was retrieving a stolen 4x4 in a field.
 
It's a td5 dash with a Raptor fasia on the console. If you contact Phil Raptor at Raptor engineering he'll prity much make you what ever you want. Mine cost £42.

No spam intended but it is a quality part at a good price.

And looks the dog's nads!!
 
It's a td5 dash with a Raptor fasia on the console. If you contact Phil Raptor at Raptor engineering he'll prity much make you what ever you want. Mine cost £42.

No spam intended but it is a quality part at a good price.

And looks the dog's nads!!

if you look in the things bought for your landy for christmas you'll see the raptor dash i bought and is the most common one i believe.
http://www.landyzone.co.uk/lz/f37/so-what-goodies-buying-your-landie-christmas-170514.html
 
Looks good - as I already had the td5 console, Phil made me the fasia so that I could fashion it to my taste.
 

Similar threads