Dan_Trials
Well-Known Member
Remoofed engine and gear box. Poked more holes in the chassis.
Dewin
Well-Known Member
Took the rear prop off. Which bloody stupid person put nuts on that only hercules could undo
You wouldn't want it coming apart at 60mph
chunkymunky
New Member
In the process of new handle assembly. How bad can a door get?
chunkymunky
New Member
Done.
gemsdad
NOT BOTHERED.
Having taken off prop, bit of hassle to get beast into diff lock....got slack linkages ..... oooohh errrr matron
well done you,rember the time when you could not change a bulb.engine rebuild next????
chunkymunky
New Member
Thought Landys came out of the factory with rust?
Yeah but my doors have tin worm on the outside and hinge point is going too :/
dodgyrob
New Member
Got a part worn (8mm tread) Bridgestone 205 r16 fitted for £20
I have 3 spare wheels, just found out that two are from a Defender and one from a series, picked the sereis wheel to have the tyre fitted to (just my luck), discovered it had an inner tube, insisted they fit the tubless tyre to it anyway and now Ive discovered the inner tube is leaking air:frusty:
I have 3 spare wheels, just found out that two are from a Defender and one from a series, picked the sereis wheel to have the tyre fitted to (just my luck), discovered it had an inner tube, insisted they fit the tubless tyre to it anyway and now Ive discovered the inner tube is leaking air:frusty:
Pikey
Dummy Ejection Facilitator..
took an old CH rad bracket and turned it into
A First aid mounting bracket on me bulkhead Both first aid kits now secured and easily accessible...
and out of pure coincidence. My Halfords multi pack of spade fuses. fits on top and wedges lovely under the lip of the bulkhead. Save all three of em rattling & bouncing around behind my seat.
A First aid mounting bracket on me bulkhead
Both first aid kits now secured and easily accessible...
and out of pure coincidence. My Halfords multi pack of spade fuses. fits on top and wedges lovely under the lip of the bulkhead.
Save all three of em rattling & bouncing around behind my seat.
Last edited:
Grit Valve
2000 4.6 Vouge
Is the can for samplestook an old CH rad bracket and turned it into
A First aid mounting bracket on me bulkhead
and out of pure coincidence. My Halfords multi pscl of spade fuses. fits ontop and wedges lovely under the lip of the bulkhead.
Got a part worn (8mm tread) Bridgestone 205 r16 fitted for £20
I have 3 spare wheels, just found out that two are from a Defender and one from a series, picked the sereis wheel to have the tyre fitted to (just my luck), discovered it had an inner tube, insisted they fit the tubless tyre to it anyway and now Ive discovered the inner tube is leaking air:frusty:
Mine did that, the tube was rubbing on something on the inside of the tube and they have ribs inside as well and this causes the tube to rub through
Pikey
Dummy Ejection Facilitator..
Is the can for samples
No it's for me needles.
nearest thing to a sharps bin I've got.. when it full I dump it near a school.. 
