defender11069 · Oct 13, 2012

welded a hole in my rear cross member waxed oiled full chassis i think i got more on me ready for a nice drive to skipton landy spares tomoz

baggyjim · Oct 13, 2012

moved mine out of the way to park the pikey wagon on the drive

lorri789 · Oct 13, 2012

Got the A pillar made up and the welder sorted it with the magic wand. Floors done too.

lilman · Oct 13, 2012

Replaced a rear wheel bearing and think ive found wots making the clunking noise

Pikey · Oct 13, 2012

removed N/s front hub/swivel/drive shaft assembly from disco's front axle. gotta do same to O/S tomorrow. & cannabilise em to use on the 110's front axle. Anyone want solid discs and callipers for a 300tdi Disco???

Andytats · Oct 13, 2012

Look what I got in the post on thursday 8)

Now painted blue and fitted just need to buy a winch for it :lol:

bankz5152 · Oct 13, 2012

Fitted a Paddock Steel Steering guard!

Was easy enough till one of the bolts took a crobar and a load of wd40 to get out!

Happy though

chunkymunky · Oct 14, 2012

Erm.........vauxhall 😡😡😡

Paul D · Oct 14, 2012

Emptied the boot ... Full of spades, shovels, tools, wire and general ****e.

Getting it ready for next weekend when I'm away laning in Wales ..

chunkymunky · Oct 14, 2012

Got mine emptying it of logs which pop is now cutting down. Seriously gotta sort a track down into woods. 20 years of timber down there rotting

easye1 · Oct 14, 2012

got overalls on, had brekkie, lots of tea, gotta get me arse into gear and to go out and change me fanny belts, as the alternator belt has been falling to bits fer months now, i even cut the flapping bits orf weeks ago...

now, need to goto the loo,
ok, undo all me overalls....

gettin old is a bar steward at times

Rawly86 · Oct 14, 2012

Changed my diff oils

DEFENDER90-DAZ · Oct 14, 2012

Got it a nice silver disklok off ebay for £26

Daz

RichP · Oct 14, 2012

Fitted sumo draglink bar and steering damper relocation kit from Gwyn Lewis. So much better than the Tarantula stuff it's replacing.

defender11069 · Oct 14, 2012

got some goodys from skipton landy spares just fitted dog guard in the 90 just new trailing arms to fit now

DEFENDER90-DAZ · Oct 14, 2012

defender11069 said:
got some goodys from skipton landy spares just fitted dog guard in the 90 just new trailing arms to fit now

Nice! Looking for a dog guard for my 90 too!
Can i ask - whats the white box hanging from it??

Daz

bluehaze · Oct 14, 2012

Changed the water pump but it just overheats even quicker! Have ordered a new radiator as the fluid doesn't seem to flow as quickly as it should. Hopefully that will sort the overheating issue because I'm all out of ideas!

flatlander · Oct 14, 2012

Fist run of my rebuilt 200 - will it work? All those parts, all those bolts and bearings, all those seals.......surely not

But - started as soon as the air was out of the fuel line, no leaks yet, and even the replaced transfer box works!:cheer2::cheer2::cheer2:

Thanks to all the guys who helped answer questions - certainly made life a lot easier.

defender11069 · Oct 14, 2012

DISCOVERY1-DAZ said:
Nice! Looking for a dog guard for my 90 too!
Can i ask - whats the white box hanging from it??

Daz

thats the speaker for the cb

blue beasty · Oct 14, 2012

Drove it down to the chippie party venue yesterday, drove it round a bit, filled it up with half a dead Disco and drove it back again today

AKA Mr cool...

New Member

Well-Known Member

New Member

Dummy Ejection Facilitator..

New Member

Well-Known Member

New Member

Old, nackered 'n broke, but the Landy is fine . :)

New Member

Banned

Active Member

New Member

Active Member

AKA Mr cool...

Attachments

New Member

Well-Known Member

It's not broken!

AKA Mr cool...

Leaks an prone to bits dropping off

Similar threads