Fag lighter socket fitted - just need some modern gadget to plug into it:

P5180001.jpg
 
New bushes on the rear radius arms ... the auld ones were those pesky rubber ones, but the new ones are nice colourful Poly ones. First one took me minutes to get the arm off (I deliberately did the one that didn't need replacing first.) Anyway about 3 hours and several knackered screwdrivers later, I had the auld bush out and the arm back on. The second one came off even faster and I popped up to a local engineer's as they were supposed to have made me a couple of flanges and while I was there I got them to pop the auld bush out of the second arm for me. Took them about 30 mins and 5 minutes later the arm was back on TheBus.

I wanted to do the brake pipes, but I was cold, tired, hungry and desperate for a cuppa tea. Brake pipes can get left until tomorrow.
 
New RF receiver fitted, £51 quid off fleabay, rather than £160 from most places. Well chuffed :D
 
new rear discs on disco (and pads of course). Also got pair of heavy duty (for caravan etc) std hight rear springs fitted, now misses don`t like how high back is to lift shopping in as shes only short. Haddent realised how low it sat before, oh well she will get over it! And before any women start....she is stuborn you lot say I can do it so I let you:D
 
new fuel filter and clean sedimeter for me today :D

ready for chip fat tomorrow! Drives much better now... its feels like an F1 car!! :crazy_driver:

just need to crank that fuel pump up now!!! :5bhurray:
 
Dewin said:
Finished the bumper yet???????:D:D:D:D
Click to expand...

I'll be starting tomorrow ;) I'll have pictures too don't worry :D :D



Off to collect the welder tomorrow and make sure it works and the Snorkel should be here on Tuesday hopefully :) So I'll be at the metal stockists on Monday with my templates after I draw them up tomorrow evening :D
 
Fitted new master and slave cylinder....alot smoother gear
change now :) also fitted new fuel filter and air filter may
well change the oil tomorrow....weather permitting :)

land044.jpg
 
Not me personally but a lot of guys on here have, theres a massive thread on here search for ****part and you'll find it if interested
 
Kieronhill said:
only the filters britpart, not the master/slave cylinders :) have you
had a bad expierence with britpart?
Click to expand...
Britpart are a supplier not a manufacturer, you have to be careful to specify exactly what you want when buying. They will sell you everything from genuine and uprated parts to complete rubbish.
 
Finished fitting a new O/S half shaft and CV joint, new bearings, discs, pads, calipers, braided hoses and HD drive flanges. Shiny bits..!

33940_10150981262977994_655047993_12006895_1786519460_n.jpg
 
The wife and I did the Berkshire 4x4 experience - really enjoyed it and had a top instructor. Thank god it was his landy as we got it sh1t-up.
 
removed me CB Aerial from the rear gutter mount and moved it onto me light bar. & rerouted the coax cable. Had to drop most of the roof lining to do it though :doh: serves me right for doing the job properly in the first place. Fitted me front steering guard.

Also put me AutoHaven 4x4 tent up to air it out as it's been packed away for nearly 4 years :eek:

IMG00679-20120519-1553.jpg


IMG00678-20120519-1553.jpg
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
649
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
928
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
603
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I