[DefenderV8]

Fag lighter socket fitted - just need some modern gadget to plug into it:

 

[Diesel Do]

New battery for the Freelander!

 

[Clanforbes]

New bushes on the rear radius arms ... the auld ones were those pesky rubber ones, but the new ones are nice colourful Poly ones. First one took me minutes to get the arm off (I deliberately did the one that didn't need replacing first.) Anyway about 3 hours and several knackered screwdrivers later, I had the auld bush out and the arm back on. The second one came off even faster and I popped up to a local engineer's as they were supposed to have made me a couple of flanges and while I was there I got them to pop the auld bush out of the second arm for me. Took them about 30 mins and 5 minutes later the arm was back on TheBus.

I wanted to do the brake pipes, but I was cold, tired, hungry and desperate for a cuppa tea. Brake pipes can get left until tomorrow.

 

[Stufer]

New RF receiver fitted, £51 quid off fleabay, rather than £160 from most places. Well chuffed

 

[uncle albert]

new rear discs on disco (and pads of course). Also got pair of heavy duty (for caravan etc) std hight rear springs fitted, now misses don`t like how high back is to lift shopping in as shes only short. Haddent realised how low it sat before, oh well she will get over it! And before any women start....she is stuborn you lot say I can do it so I let you

 

[Dr_evil]

Bought a 190 amp welder and a Southdown snorkel

 

[Dewin]

Bought a 190 amp welder and a Southdown snorkel

Finished the bumper yet???????

 

[disco147]

new fuel filter and clean sedimeter for me today

ready for chip fat tomorrow! Drives much better now... its feels like an F1 car!! :crazy_driver:

just need to crank that fuel pump up now!!! :5bhurray:

 

[Dr_evil]

Finished the bumper yet???????

I'll be starting tomorrow I'll have pictures too don't worry



Off to collect the welder tomorrow and make sure it works and the Snorkel should be here on Tuesday hopefully So I'll be at the metal stockists on Monday with my templates after I draw them up tomorrow evening

 

[Kieronhill]

Fitted new master and slave cylinder....alot smoother gear
change now also fitted new fuel filter and air filter may
well change the oil tomorrow....weather permitting

 

[Dr_evil]

Oooh britpart you brave brave man

 

[Kieronhill]

only the filters britpart, not the master/slave cylinders have you
had a bad expierence with britpart?

 

[Dr_evil]

Not me personally but a lot of guys on here have, theres a massive thread on here search for ****part and you'll find it if interested

 

[lee74]

Changed Crankcase Breather used the BMW part

 

[alexandthedog]

renewed rear prop doughnut. looong over due!!

 

[Andy Land]

Bought her an iPad3 mount from Fleabay.

 

[waldershelf]

only the filters britpart, not the master/slave cylinders have you
had a bad expierence with britpart?

Britpart are a supplier not a manufacturer, you have to be careful to specify exactly what you want when buying. They will sell you everything from genuine and uprated parts to complete rubbish.

 

[ScratchyDom]

Finished fitting a new O/S half shaft and CV joint, new bearings, discs, pads, calipers, braided hoses and HD drive flanges. Shiny bits..!

 

[bluehaze]

The wife and I did the Berkshire 4x4 experience - really enjoyed it and had a top instructor. Thank god it was his landy as we got it sh1t-up.

 

[Pikey]

removed me CB Aerial from the rear gutter mount and moved it onto me light bar. & rerouted the coax cable. Had to drop most of the roof lining to do it though :doh: serves me right for doing the job properly in the first place. Fitted me front steering guard.

Also put me AutoHaven 4x4 tent up to air it out as it's been packed away for nearly 4 years