Banged my leg against the chassis in the garage and opened the door of the one in the driveway, looked at the spiders and closed the door again.
 
:rolleyes:

Any photos?

Yep! I also filled it up with Diesel and checked the tyre pressures today too, while we're on the topic.

001.jpg


002.jpg


003.jpg


I still need to put one more bolt through the rear section (the photo above), but I need to get the door open more so I can get the drill in there properly. All bolts are M8x100 "set screws" (with the thread all the way to the end, no shoulder at the top) with Nyloc nuts. The "set screws" have a tensile strength of 8.8 too, as it happens! :D

Oh, and my god they're cumbersome when you're on your own! I propped one end up with an axle stand, jacked the other end up into position and then put stuff in between the slider and the axle stand to keep the other end in position while I drilled through. Much easier with a second pair of hands, I imagine.
 
Last edited:
started bleeding the breaks tonight, bought a cheap one man bleed kit off ebay, £4.00, bargain, actually really good, didnt finish due to a dam leaking cylinder
 
Got new wheels of fleabay (some nice boost alloys), ordered some Insa Saharas, and ordered a swing away spare wheel carrier.

Now I'm skint!!
 
fitted noo radiator and lower oil cooler pipe. checked wading plugs - nice & clean. Refilled with water only and runs very cool. :D

fitted noo bonnet catch.

Do all the leakoff fittings on a 300tdi have 2 connectors? coz the rear one only has one hose, but has two pipes.:eek:
 
Last edited:
fitted noo radiator and lower oil cooler pipe. checked wading plugs - nice & clean. Refilled with water only and runs very cool. :D

fitted loo bonnet catch.

Do all the leakoff fittings on a 300tdi have 2 connectors? coz the rear one only has one hose, but has two pipes.:eek:

Really!!!!:p:p;):D:D
 
on a 300TDI - is there meant to be an open leak-off pipe?

see pic - if yu look by the bulkhead, there appears to be an open end :confused:

23089d1303416301-what-have-you-done-your-landie-today-img_1176-1-.jpg
 

Attachments

  • IMG_1176[1].jpg
    IMG_1176[1].jpg
    234.7 KB · Views: 577
today me my mate took the head off the 12j and got it stripped down and cleaned up ready for new valve stem seals and new hotspots
 
Just had a quick check over the bus tonight... probably missed some stuff!.. Ah'll see what crops up the morn at the MOT!!!
 
got some mud flap brackets and mud flaps from froggatts..
24 hr delivery..
fitted o/s one..
only took half hour..
perfect fit..

well chuffed...
 

Similar threads