Sirus · Mar 27, 2010

Gave me 2a chassis a coat of Black paint. Tis all shiney now.

666 george · Mar 27, 2010

Got the old boy MOT'ed today and passed

Then fitted the body sliders I made at work the other day and waxoyled the bottoms of the doors

Tim.C · Mar 27, 2010

Filled mine with Bio.

Tomorrow I need to see if I can work out where it's coming out again!!!!!

Pikey · Mar 27, 2010

Not mine. But Series71's put another engine in the fooker and half a doz eggwhites in the rad after it sprung a leak when we refitted it

I've never seen Robin work so fast. Well not at first but after S71 said he'd stop over of it weren't finished today. And then reeled off what he had for his breakfast.. He really stepped up a gear or two.

:

ironmonkey60 · Mar 27, 2010

fitted my major 558 cb radio and then had to charge battery cos it was dead lol

oh and fitted landmeter to.

Series71 · Mar 27, 2010

got home ! all runnin perfect...doing 60 uphill on the a303 with the old engine in the back....ew uns a good un ! BIG thanks goes out to pikey and robint

90truckcab · Mar 27, 2010

looked at me poorly alternator on the 90 then played with the series 2 some more

Pikey · Mar 27, 2010

Series71 said:
got home ! all runnin perfect...new uns a good un !

Till we go out next weekend

:doh:

pandy7203 · Mar 27, 2010

repaced me rear eas height sensor ,and repaced me wheels ...............

Terra Dog · Mar 28, 2010

Hav'nt a clue where its comin from, i think it's comin from between the protector plate on the bottom of the tank. Shall be giving the new tank a good coat of hammerite and the chassis where the tank goes.

ratty · Mar 28, 2010

Terra Dog said:
Hav'nt a clue where its comin from, i think it's comin from between the protector plate on the bottom of the tank. Shall be giving the new tank a good coat of hammerite and the chassis where the tank goes.

Yep. sounds like your landy is normal.

baggyjim · Mar 28, 2010

Series71 said:
got home ! all runnin perfect...doing 60 uphill on the a303 with the old engine in the back....ew uns a good un ! BIG thanks goes out to pikey and robint

ahem

robint · Mar 28, 2010

baggyjim said:
ahem

bastid ant he not fanking you aswell , alright to keep hold of it for a while as im going to do me 110 in a few weeks
ill say it fanks for the use of the hoist

baggyjim · Mar 28, 2010

robint said:
bastid ant he not fanking you aswell , alright to keep hold of it for a while as im going to do me 110 in a few weeks
ill say it fanks for the use of the hoist

no probs mate thats ok will put invoice in post to him

ratty · Mar 28, 2010

baggyjim said:
no probs mate thats ok will put invoice in post to him

don't forget to add WAT.

****er Added Tax.

d_ave2003 · Mar 28, 2010

disco 300tdi
replaced discs and pads yesterday took me 6 hours to get a caliper bolt out and an hour to do the other side was gutted .fitted a new air intake manifold gasket today still not sorted my power problem thow cant seam to find out what is causing it

MrC · Mar 28, 2010

1st ever job today, never worked on a fender until today, removed EGR valve and fitted kit from TD5 Alive
was careful with the bolts out of the exhaust manifold, other than that no drama's

gcoo8154 · Mar 28, 2010

collected my internal roll cage for my 90 this morning rubbed down, primed, then 2packed white looks the nuts now

robint · Mar 28, 2010

going to insure and tax the 110 in the morning , then hopefully use it for the trip planned on saturday

ratty · Mar 28, 2010

robint said:
going to insure and tax the 110 in the morning , then hopefully use it for the trip planned on saturday

Is Mrs T coming on sat?

Your all Banned except me

Well-Known Member

Active Member

Dummy Ejection Facilitator..

New Member

Space man

Well-Known Member

Dummy Ejection Facilitator..

New Member

New Member

I'm not special I'm limited edition

New Member

Well-Known Member

New Member

I'm not special I'm limited edition

New Member

New Member

Well-Known Member

Well-Known Member

I'm not special I'm limited edition

Similar threads