Been spending embarrassing amount of time looking at tyres / tyre wheel combos...yawn...have to make a decision, reckon will go for non remould on steel wheels so I can drop the now limited tube range currently on the old ( probably rusty on the inside) 110 ex mod :)
 
took it out to see if the mound of loose road surface was about to try understanding the suspension a bit better with the combination I have. got some real good articulation and think I have a better understanding now. also sorted out the reverse lights onto a manual lit switch so now I can get annoyed with oblivious people walking behind me when I am trying to reverse. and also filled a random hole with another lit switch for my roof lights.

had a play with my mates aswell and adjusted his rocker clearances sealed his snorkel and nearly lost my hand down the top of the snorkel lol so a boring day at work turned quite productive.

also found one of my front pads has worn on a slant so I have 3mm material on one edge and very nearly nothing on the other, would I need a caliper rebuild kit or just new pads?

only problem now is after taking mine to a private (we are allowed access) field mine now refuses to stay in high range and makes on hell of a bang when it kicks out to neutral so had to crawl the 2 miles home in low range 5th gear. anyone got any idea what might have happened.
 
Mine is being a #### at the moment. Air con pipes spewing into the footwell and she thinks I haven't unlocked her properly so won't start from unlock on key fob, have to repeat the cycle in the cab on the fob then she starts.

Love her weally....:p
 
I've been to a fabricators and had some aluminium sheets cut and bent to cover back windows on csw to make it more utility.
Just need to chuck some paint on...sealant and rivet.
 
Used it to deliver 2 tons of feed pellets to the pheasant pens.
Poults arrive next Saturday.
 
Animal88 said:
took it out to see if the mound of loose road surface was about to try understanding the suspension a bit better with the combination I have. got some real good articulation and think I have a better understanding now. also sorted out the reverse lights onto a manual lit switch so now I can get annoyed with oblivious people walking behind me when I am trying to reverse. and also filled a random hole with another lit switch for my roof lights.

had a play with my mates aswell and adjusted his rocker clearances sealed his snorkel and nearly lost my hand down the top of the snorkel lol so a boring day at work turned quite productive.

also found one of my front pads has worn on a slant so I have 3mm material on one edge and very nearly nothing on the other, would I need a caliper rebuild kit or just new pads?

only problem now is after taking mine to a private (we are allowed access) field mine now refuses to stay in high range and makes on hell of a bang when it kicks out to neutral so had to crawl the 2 miles home in low range 5th gear. anyone got any idea what might have happened.
Click to expand...

Not sure what causes it but my mate had it and fixed it with a cable tie to keep it jumping out! Lol
 
Stripped it down for a rebuild.
 

Attachments

  • h.JPG
    h.JPG
    53.2 KB · Views: 185
  • g.JPG
    g.JPG
    50.8 KB · Views: 219
  • f.JPG
    f.JPG
    31.6 KB · Views: 170
Front end prep today.

Lights out, sand + scratch + fill and hopefully prime if the weather sticks. Just need to figure out how to remove this aerial and whether to drill the new chequer plate to replace it in the original location or not..........
 
uncovered the disco td5 out of hibernation under the tree i abandoned it at and scrubbed the living sh*t out of it cause it was caked in crap.
 
Dr No said:
Looks like it maybe between box and transfer box somehow but don't really know? Also at the back of the box where it connects to the rear prop.
Click to expand...

dont sound good. if its just the transfer box seal it can be done easily. some pics would help
 
got it to stay in high box by taking the selector knob off so the main box lever doesn't nudge it. think I need some adjustment
 
Front end final sand and fill & prime except window surround and vents + front to back offside filling of doors and wings
 
Passed MOT with 1 advisory! Loose bolt on the Panhard rod! Was the culprit of my dodgy steering...

Smoke test came back at .20 m-1 I understand this to be good?
 
Last edited:
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
549
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
649
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
931
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
603
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
1K
invisible999
I