aaronmorris
Head's a shed
Finished painting the chassis and had a look at the engine, needs steaming off and the gearboxes painting maybe blue I think
Yet more blue eh
I painted me rocker cover blue today. Well I wouldn't want to much would I
Yet more blue eh
I painted me rocker cover blue today. Well I wouldn't want to much would I
mikescuba
Well-Known Member
Yet more blue eh
I painted me rocker cover blue today. Well I wouldn't want to much would I
Nice job.
mikescuba
Well-Known Member
Fingers crossed for you here in France where you only have to get it done every two years
SmileySteve
Well-Known Member
Not too bad, rear drums or disks? may just need adjustments
Mine had a lot of travel. plus pedal kept sinking so fitted new master cylinder and fixed prob
SmileySteve
Well-Known Member
Re-fitted new door top seal on passenger side with tad deck sealant to make up for slight unevenness as just had a tiny leak. Drivers side now finally dry! happy days
danny6801
Well-Known Member
Not too bad, rear drums or disks? may just need adjustments
Mine had a lot of travel. plus pedal kept sinking so fitted new master cylinder and fixed prob
I think it's the rear drums on mine going to change the cylinders see what happens.
SmileySteve
Well-Known Member
Maybe just shoes worn, if no sign of leaking fluid.
Easy to adjust up, amazing at how a little adjustment can make on the pedal travel. Good luck
cornish rattler
Well-Known Member
Adjusted the steering lock stops today as my new tyres were rubbing on the radius arms
aaronmorris
Head's a shed
DaveM-sport
Active Member
Yesterday, Fitted my near gearbox, new transfer box seals, master and slave cylinders, greased up the props, fitted the Detroit tru-trac to the front axle with new CV joints and drive-flanges and checked the wheel and swivels bearings and fitted the Detroit locker to the rear Salisbury axle. Must wait until next week until my new intercooler arrives and can replace the cracked one then and should be back to full health then
Looks like I needed the lockers anyway...
This was the diff center that came out or the front axle!
Also fitted a tuning box I got secondhand, new MAF and straight through center section exhaust pipe to my dads Disco 2... Pulls quite nicely now as I fitted a larger intercooler to it a while back so making the most of it now with the chip! Hopefully he might still want more power soon and buy my VNT so I can get the bigger one
Looks like I needed the lockers anyway...
This was the diff center that came out or the front axle!
Also fitted a tuning box I got secondhand, new MAF and straight through center section exhaust pipe to my dads Disco 2... Pulls quite nicely now as I fitted a larger intercooler to it a while back so making the most of it now with the chip! Hopefully he might still want more power soon and buy my VNT so I can get the bigger one
