Attempted to take out the thermostat which stuck yesterday and had to drill out one of the bolts that was rounded off. My local bolt shop is shut saturday so I'm waiting for Debs to get home from work so I can nip over to my workshop to get another one.

Tried the thermostat in boiling water and it didn't move so I'm happy with that diagnosis.
 
:confused: Well the bulb looks fine so it must be a fuse....don't know the first thing about them either. Off to try figure that out:scratching_chin:
 
:confused: Well the bulb looks fine so it must be a fuse....don't know the first thing about them either. Off to try figure that out:scratching_chin:
Try the connections in wires close to headlamp they play up and need twiddling/ cleaning etc:)
 
:confused: Well the bulb looks fine so it must be a fuse....don't know the first thing about them either. Off to try figure that out:scratching_chin:

138a55a7eff1faaace1dd910454b65cc.jpg


Have a look
 
Thanks drew...I will go investigate :D!



The wiring looked ok -made sure it was all put back together securely, they are new lamps with new bulbs (well a few months old) so should be fine:rolleyes:

Just a quick one 60/55 watt ?
Head lights all work or just dip ?
No head lights at all ?
Or just one side ?
 
Well I am stumped:confused: Changed the bulb , checked the fuse, wires twiddled and clean! Nothing! Its just the right hand headlight not working ,everything else is fine.
 
Well I am stumped:confused: Changed the bulb , checked the fuse, wires twiddled and clean! Nothing! Its just the right hand headlight not working ,everything else is fine.

Does it work at all, cause dip and full are different fuses.

Check the wires coming out of the headlight and follow them. Sometimes the connectors come apart.

And there ends my electrical knowledge, good luck :D
 
well......

measured up n started chopping.....

9690429383_aa1e82bf98_c.jpg


fitted the comp rear corners on the 110

9690432923_faf23d8ac2_c.jpg


got her outside....

9693672608_5404407801_c.jpg


then after cracking a windscreen trying to fit.... arghhhhh decide to trial fit the lro soft top , the original shrank and Exmoor gave lro a brand new one... so here it is new out the box :)

9693673682_d7943561e1_c.jpg


things are getting closer to the light at the end lol

9693677428_9ae860f8df_c.jpg


cheers steve
 
Does it work at all, cause dip and full are different fuses.

Check the wires coming out of the headlight and follow them. Sometimes the connectors come apart.

And there ends my electrical knowledge, good luck :D

Thanks Sue I checked as much as I could so am missing something somewhere:rolleyes: am going to have another look at the wires to triple check!
 
well......

measured up n started chopping.....

9690429383_aa1e82bf98_c.jpg


fitted the comp rear corners on the 110

9690432923_faf23d8ac2_c.jpg


got her outside....

9693672608_5404407801_c.jpg


then after cracking a windscreen trying to fit.... arghhhhh decide to trial fit the lro soft top , the original shrank and Exmoor gave lro a brand new one... so here it is new out the box :)

9693673682_d7943561e1_c.jpg


things are getting closer to the light at the end lol

9693677428_9ae860f8df_c.jpg


cheers steve

Is there much to add on the back end, look very high :eek: but also looks good!
 
Is there much to add on the back end, look very high :eek: but also looks good!

nothing more to add ... however its on rather small tyre so look odd lol.... currently sat on normal disco tyres ... she will sit on 42" minimum so will look a little more 'even' lol on 42" tyres its a minimum 16" lift :)

cheers steve
 
Spent all day fitting a new a frame fulcrum and balljoint. I'm soaked through, sore, stiff and fed up. But its done :D and what a different its made, no more clunking when changing gears or lifting off the accelerator.

**** pic cos my batterys dying and I couldn't use the flash but you can see the shiny shiny :)
 

Attachments

  • uploadfromtaptalk1378577061340.jpg
    uploadfromtaptalk1378577061340.jpg
    32.1 KB · Views: 178

Similar threads