GrumpyGel · Feb 10, 2023

Dar ran Dar ran said:
4h of my day ruined tbh
This is why as the years are creeping up I am slowly but surely turning in to a grumpy old git ! things I can’t understand no longer interest me but upset and confused instead
Next time it’s going to a garage!!

Lol, you'll be really grumpy when they bill you for the 4 hours they spend on it

TBH modern cars are supposed to be good at identifying faults because they'll throw a code for what's broke. But when the diag stuff goes wrong, its many times magnitude worse! The F2 is a prime example where the indicator switch (or what ever) is diagnosed as a BCM fault (or what ever) and after a series of VERY expensive "fixes" you've still got the same problem!

Nodge68 · Feb 11, 2023

Just arrived at the MOT garage.
Time will tell if my lack of pre-checks will come back to bite me.

Nodge68 · Feb 11, 2023

It's passed.

Although some advisories this year.

There's a rear bush on it's way out, and there's some corrosion appearing in random places underneath.
So in the summer I'll be replacing the rear drag links, and doing some rust removal and painting.

Hippo · Feb 11, 2023

Filled it with diesel.

GrumpyGel · Feb 11, 2023

Hippo said:
Filled it with diesel.

That's an expensive bit of maintenance these days

Hippo · Feb 11, 2023

GrumpyGel said:
That's an expensive bit of maintenance these days

1.64 sovs per L. Was as high as 1.85 last year. Posh diesel hit 2.02 sovs per L last year.

rob_bell · Feb 13, 2023

I used a 3D printer to print a bodge to “fix” the too high clutch pedal on my FL1 1.8. I really needs a new replacement master/slave kit, but instead I’ve printed and installed a pedal stop to prevent the pedal rising too far.

Seems to be working a treat - the .stl file is available on request!

kernowsvenski · Feb 13, 2023

rob_bell said:
I used a 3D printer to print a bodge to “fix” the too high clutch pedal on my FL1 1.8. I really needs a new replacement master/slave kit, but instead I’ve printed and installed a pedal stop to prevent the pedal rising too far.

Seems to be working a treat - the .stl file is available on request!

I like this. You've identified a problem that you know will need to be fixed sometime, but have applied a bit of ingenuity to keep you going for a while, which won't do any damage. And you've shared the idea.

hd3 · Feb 14, 2023

saying goodbye to the original alternator,
looks to have died yesterday .. 200k+ miles ..
was wondering how long it would last ;-/

well .. i can view voltage output via a dash mount 'scangaugeII' ..
voltage were dropping below 'normal' ..
was down to 11.6v at low rpm .. normal being 13.9 / 14.1 ..
depending if ac. and/or ptc heater being used.
'n battery warning light were illuminating ..
no sound of slipping belt .. they were replaced not long ago.

brought battery inside to trickle charge ..
battery seems to be ok .. ..
.

Pappasmurf · Feb 15, 2023

Got some roof rack ladder clamps and put my waffle boards on the roof.

Pappasmurf · Feb 16, 2023

Passed the MOT with only 1 recommendation. Orange side repeater bulbs.

Wonk · Feb 19, 2023

Fixed my rear door not opening! The wire in the handle had broken away from the connector. So I bodged it with a choc block for now. Should hold for a few years!

Chillitt · Feb 19, 2023

It's started..

. Not had it a week and the drivers door auto fold mirror has lost it's fold. or at least its auto..

Nodge68 · Feb 19, 2023

Chillitt said:
It's started... Not had it a week and the drivers door auto fold mirror has lost it's fold. or at least its auto..

If they get knocked, they can become free from the drive dog.
However it's also possible for the fold mechanism to seize. I've got a less than smooth fold motor, which I'll look at once the weather improves.

Chillitt · Feb 19, 2023

Nodge68 said:
If they get knocked, they can become free from the drive dog.
However it's also possible for the fold mechanism to seize. I've got a less than smooth fold motor, which I'll look at once the weather improves.

It was a bit clicky before but I was also waiting for 'weather' to improve.

Nodge68 · Feb 19, 2023

Chillitt said:
It was a bit clicky before but I was also waiting for 'weather' to improve.

Unfortunately there's no repair kit available for the FL2, at least not one I've found.
If the fold mechanism can't be made to work again, the mirror will need replacing, if power fold is still needed.

Alibro · Feb 19, 2023

The mirrors on my SE are kinda floppy so I was thinking of swapping them for the ones off my S.
Not auto folding but are in a decent shape

Chillitt · Feb 19, 2023

Nodge68 said:
Unfortunately there's no repair kit available for the FL2, at least not one I've found.
If the fold mechanism can't be made to work again, the mirror will need replacing, if power fold is still needed.

I'm a partially reformed blacksmith, inveterate bodger, and Ive had 10 years of bangernomics, I cant believe there's nothing to be done..

Alibro · Feb 19, 2023

Chillitt said:
I'm a partially reformed blacksmith, inveterate bodger, and Ive had 10 years of bangernomics, I cant believe there's nothing to be done..

Only partially???

Given enough time and money anything can be fixed.

rob_bell · Feb 20, 2023

kernowsvenski said:
I like this. You've identified a problem that you know will need to be fixed sometime, but have applied a bit of ingenuity to keep you going for a while, which won't do any damage. And you've shared the idea.

Thanks - it took a couple of iterations, but printing a 20mmx25mmx25mm cube with a 15mm base seems to be doing the job quite well. I'll post some photos and share the file if anyone else needs it

[It's only a money saving idea if you already happen to have access to a 3 printer! LOL]

Well-Known Member

Well-Known Member

Well-Known Member

Lord Hippo

Well-Known Member

Lord Hippo

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Similar threads