thequeenscheese · Nov 7, 2014

Replaced the fubard reardiff mount for a polybush, just 2 to go now..

Arctic2 · Nov 7, 2014

I finished fitting the side step bar yesterday was lucky as it as not pouring down here all day so far,

Arctic2

bukko · Nov 7, 2014

I like them! Prefer them to the steps.

I'll get some eventually...

davew13 · Nov 7, 2014

The tubes above are the ones I recently fitted but I got the black ones (my fl1 is black).

dave21478 · Nov 7, 2014

Passed the emissions testing procedure. Had to turn the Synergie off before-hand as they dont like that sort of thing here.

Morten 1 · Nov 7, 2014

Finally got the parcel from gentlemenofsalvage. Small minor bits that I needed. However, they did not provide me with the bolts for the enginebay cover. Long shot, but do anyone know what kind of bolts I need?:S

This is where it's suppose to be fitted:

baptista · Nov 8, 2014

Morten said:
but do anyone know what kind of bolts I need?:S
This is where it's suppose to be fitted:

you need LRpart EDP1127L x3, or you can take one out from the left side and check if you have some that are alike in your "box of spare nuts and bolts"

thizzlemania91 · Nov 8, 2014

Washed it after a long day at the ranch.

Morten 1 · Nov 8, 2014

baptista said:
you need LRpart EDP1127L x3, or you can take one out from the left side and check if you have some that are alike in your "box of spare nuts and bolts"

You Sir, are a star! Thanks a lot! I guess I'll take one from the other side temporarily, don't like driving around with the belts etc. exposed like that. Will have a look in the magic spare nuts and bolts box for something similar.

thequeenscheese · Nov 8, 2014

Morten said:
You Sir, are a star! Thanks a lot! I guess I'll take one from the other side temporarily, don't like driving around with the belts etc. exposed like that. Will have a look in the magic spare nuts and bolts box for something similar.

Contact them I'm sure thell send them you out they seem decent enough peoples

Diesel Do · Nov 8, 2014

I'm pretty sure they're just m6 bolts

jamesmartin · Nov 8, 2014

Diesel Do said:
I'm pretty sure they're just m6 bolts

they are

Kizzeh · Nov 8, 2014

But landrover do special ones!

myotherworld · Nov 9, 2014

Finally got round to changing the front seats over from full leather to leather/suede
did the back ones a couple of months back.
just like the look of the suede over full leather. so happy days

Kizzeh · Nov 9, 2014

Serviced the td4 yesterday, whilst I was there I cleaned out the inlet manifold and egr. Found coke was a brilliant de-greaser, what an earth does it do to our body's?
Goes a lot better now, going to have to invest in an egr blank soon.
Just the bmw crankcase breather to change. They had the full kit with lid etc in stock but the filter on its own was £15 cheaper the only thing is I will have to wait until Monday.

Oh and what a pig the 6mm screws are for the pollen filter. Had to grind down a socket! My non genuine replacement filter had bigger holes, you would have thought the genuine filter I took out would have them

Epicuser · Nov 9, 2014

Got it a little muddy. Had a hilarious day out on the Plains.

More photos to be posted later in my car thread.

baptista · Nov 9, 2014

fitted my DIY rear upper light guards. will post pics tomorrow cause it's too dark outside to get any decent pictures with my "dumbphone".

baptista · Nov 10, 2014

as promised...

SES88 · Nov 10, 2014

Worked out that since I've had my car serviced and the thermostat changed, my average mpg has gone up by 9...zoiks!!

RealBeale · Nov 10, 2014

baptista said:
as promised...

How the hell do you do up that centre screw on the upper lights?????

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Member

Active Member

Active Member

Active Member

Active Member

Attachments

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Ex Freelander Owner

Active Member

Active Member

Well-Known Member

Active Member

Similar threads