Hi all,
Did a 're-blacking' of all the outside black trims ie wheel arches, back door, petrol cap, scuttle, handles etc.....
Time consuming but does look good....
Pics? and how did you do it?
Pics? and how did you do it?
myths63
New Member
Pics? and how did you do it?
Hi, no pics....sorry, i always use CarPlan Back to Black Trim Polish (about a fiver)
always do it at least once a year....when i bought the car it had not ever been done, very faded but once i gave it a few coats it was like new...now a top up now & again is all it needs
spacecowboy2442
Member
Today I have mainly been changing my aerial. Old 1 had snapped.
So very bad reception. Found a used 1 up the shed 5mm thread.
Jobs a goodun.
So very bad reception. Found a used 1 up the shed 5mm thread.
Jobs a goodun.
just found part of the bracket/lug on the clutch slave cylinder mount had rotted and fallen off lucky it was sitting on the under tray so removed and welded with s/steel rods all back as it should be
meant to be a new clutch fitted but the bite seems a bit low may have to check the slave cylinder
then found the rad was leaking so ordered another 2nd hand with twin fans
Ron
meant to be a new clutch fitted but the bite seems a bit low may have to check the slave cylinder
then found the rad was leaking so ordered another 2nd hand with twin fans
Ron
spent the day chatting to two nice police men about the 6k+ of tools that were nicked from my workshop last night and how i wouldn't now be doing the front wishbones and drop links on my fl this weekend as all my tools were gone
I'm a carpenter by trade and that's my livelihood gone, sadly they left behind the alarm system i was going to install this weekend as well, knew i shouldn't have put it off but after 6 years with no trouble you get complacent i suppose
I'm a carpenter by trade and that's my livelihood gone, sadly they left behind the alarm system i was going to install this weekend as well, knew i shouldn't have put it off but after 6 years with no trouble you get complacent i suppose
spent the day chatting to two nice police men about the 6k+ of tools that were nicked from my workshop last night and how i wouldn't now be doing the front wishbones and drop links on my fl this weekend as all my tools were gone
I'm a carpenter by trade and that's my livelihood gone, sadly they left behind the alarm system i was going to install this weekend as well, knew i shouldn't have put it off but after 6 years with no trouble you get complacent i suppose
arr **** man feel bad for you...
thieving little t**ts should try working for there own tools
cheers mate took me a long time to gather them all up, after 20 years spannering on my own cars i finally treated my self to a snapon torque wrench yesterday (been saving for one for ages) and guess what was among the things they took
that and a **** load of bosch power tools and most my sockets spanners and anything else they could carry
RichStone
New Member
Finally got round to fitting my A Bar and Landy Spots... Haven't wired them up yet as it started raining just after bolting everything together but the loom is in, complete with fused relay.
I've got a set of new bonnet letters to put on too and I've been thinking of fitting some DRLs in the smaller gap just above the reg plate...
I've got a set of new bonnet letters to put on too and I've been thinking of fitting some DRLs in the smaller gap just above the reg plate...
Last edited:
RichStone
New Member
I can't remember the exact model but they are Land Rover supplied. I think they might be Safaris or something like that. I bought a roof rack with four of them mounted on the front, but the rack was too high so I sold two lights to my dad and, obviously, kept the other two. It actually ended up being a good deal as I've still got the rack to sell on...
deejaybarn33
New Member
fixed the drivers window at last
