Looks like a pain of a job.Changed the rear discs and calipers as they were sh@gged.
Three of the caliper bolts did the usual rounding off trick.
Bought some of these from screwfix
View attachment 304413
They took one off no bother, which sorted one caliper. However, couldn't get them to hammer on the remaining two bolt heads.
Nothing for it but to get the angle grinder out.
Cut the caliper in half just behind the disc
View attachment 304414
This allowed the hub to come off.
View attachment 304415
This gave access to the top bolt head
View attachment 304416
Cut that off and access to the bottom one to cut that one off was easy.
What was left of the caliper just knocked off the studs that remained.
View attachment 304417
The next sized down bolt removing socket was a much better fit on the stud and hammered well on, so the studs came out very easily. I did give the lugs a good heating with a gas torch first though.
All back together and sorted.
View attachment 304418
Not the best day to be out working on the drive
How many sandwiches do you get in your external lunch box ?Fitted these Radar Renegade RT+ tyres on the Defender. Very quite on road, and 3 peaks snow rated and cheap.
View attachment 304423View attachment 304424
It has recovery gear inside.How many sandwiches do you get in your external lunch box ?
It was a pain. I spent yesterday afternoon trying to hammer that socket on the two seized bolts. Then went on Screwfix again and ordered a 5 pack of 1.5mm metal cutting discs for the angle grinder, because I only had stone cutting discs left. The Mrs picked them up on the way home from work. It was very easy to cut the caliper up. If I'd had the discs already I would have saved half a dayLooks like a pain of a job.
Looks all a bit rusty under there, you need a few more oil leaks, that will sort it.
Fitted a snow cowl to the heater vent in.
Tried to replace the bushes on my rear shocks but can't get bottom nut of the first one i tried!! now peed off!!
You missed grinder
That’s only if the chisel fallsYou missed grinder
I love that store. Since I left Hampshire I haven’t been in one. Have to online order now, but it ain’t the same. So easy to browse and leave with a 20 kilo bag of sheep nuts, I don’t even have sheepMole Country Store
Fingers crossed you keep the water outLoaded a couple of spades inot the back and spent a couple of hours digging trenches from our flooded lane across verges to ditches to allow the water to drain away. Doing our local councils job for them. Hoping for a council tax rebate.
Good luck with the rebate, mote likely charge you for unauthorised use of a spade!Loaded a couple of spades inot the back and spent a couple of hours digging trenches from our flooded lane across verges to ditches to allow the water to drain away. Doing our local councils job for them. Hoping for a council tax rebate.
And prosecute for some obscure health and safety breach!Good luck with the rebate, mote likely charge you for unauthorised use of a spade!
Cool, make sure you post some pictures up.Loaded up ready for a couple of days laning in the Lake District.