Magicgrotto said:
:rolleyes: TRIP to spec savers may be an idea gstuart:eek::rolleyes::rolleyes::rolleyes::rolleyes::p
Click to expand...

ah raspberries , no double raspberries with i may add a cherry on top , along with a double helping of knickers :p:p:D:D

so bloody ner nicky ner ner :p:D

bloody hell i wondered why people keep telling me to stop clicking like a bat , thk god i didn't say that out loud , pheeeeeeeewwwww :rolleyes:
 
,,.
gstuart said:
wondering would it be any good if u ran the breather pipes up inside the snorkel so there raised and out of the way

i checked on mine and it says it has a 2 foot wading depth , not sure how that compares with the d1 and d2

imagine the d2 would be able to wade deeper than mine , thinking of the amount of electronics i have

also read i've got electronic diff locks on front and centre which are controlled by the terrain response system , combined with the traction control

saw a good video where i can have two wheels off the ground opposite front and back and still have traction

clever stuff

think i need a lesson in how to use it :D:eek:
Click to expand...

The D2 is only to half the wheel because the breather pipe from the rear axle is low. I was thinking of connecting the breathers into the Airbox and thus the snorkel
 
still can't get that bloody glue off my window that had the tint film

tried white spirit , nail varnish remover , tar cleaner , washing up liquid ,

think its going to be a rag socked in petrol next ,

it won't come off , been doing some googling to see if there's any magic stuff out there


yeh i know use a rubber hammer on the window, all gone and sorted , lol
 
tulipandthistle said:
,,.


The D2 is only to half the wheel because the breather pipe from the rear axle is low. I was thinking of connecting the breathers into the Airbox and thus the snorkel
Click to expand...

sounds good, suppose with them right at the top of the snorkel will be well out of harms way
 
tulipandthistle said:
,,.


The D2 is only to half the wheel because the breather pipe from the rear axle is low. I was thinking of connecting the breathers into the Airbox and thus the snorkel
Click to expand...

Book states 20 inches, which is more than half a wheel. ( by approx 130mm )...........;) , If using std wheels and tyres:D
 
gstuart said:
yeh i know use a rubber hammer on the window, all gone and sorted , lol
Click to expand...
:eek: Only in a summer :rolleyes: Nail varnish remover:rolleyes: ye had probs with it mi sen :rolleyes: next then is gun wash / celly thinners or if you can get some asitone ! But I would go for thinners mi sen :rolleyes:
 
On a side note !:rolleyes: why when I look how many members are on the Zone do I only see two + 4 guest + a F/in robot (wot's a F/in robot ?) When clearly there are more members on !o_Oo_O:confused::confused:
 
Magicgrotto said:
:eek: Only in a summer :rolleyes: Nail varnish remover:rolleyes: ye had probs with it mi sen :rolleyes: next then is gun wash / celly thinners or if you can get some asitone ! But I would go for thinners mi sen :rolleyes:
Click to expand...

good idea the thinners to be honest , didn't fancy the smell of petrol up the window :eek:

acetone is that the stuff u clean printer heads with, stinks to high heaven , i think the local chemist sells that :eek:
 
gstuart said:
acetone is that the stuff u clean printer heads with, stinks to high heaven , i think the local chemist sells that :eek:
Click to expand...
Ye that's the stuff:confused:& get's you FUZZY headed in confined spaces :rolleyes:
Thinners should cut thru the sticky stuff better mi thinks:rolleyes::rolleyes:
 
neilly said:
Book states 20 inches, which is more than half a wheel. ( by approx 130mm )...........;) , If using std wheels and tyres:D
Click to expand...

to be honest i wouldn't take mine over the level of the sills, which i feel is deep enough

so many hidden dangers going into water , plus with my d3 being so electronically heavy wouldnt take the risk
 
Magicgrotto said:
Ye that's the stuff:confused:& get's you FUZZY headed in confined spaces :rolleyes:
Thinners should cut thru the sticky stuff better mi thinks:rolleyes::rolleyes:
Click to expand...

thks, will get some and see if it works, when i used the cloth it just flew out of hands where the cloth had stuck to the glass :eek:
 
Magicgrotto said:
On a side note !:rolleyes: why when I look how many members are on the Zone do I only see two + 4 guest + a F/in robot (wot's a F/in robot ?) When clearly there are more members on !o_Oo_O:confused::confused:
Click to expand...

Coz you can set your profile to be in lurker mode - specially if you're researching the porn threads :) apparently!
 
Magicgrotto said:
Have you tried a NEW Stanley blade in a scraper ?
Click to expand...

u must be a mind reader , yes tried it, no good

god knows what stuff they use, but can't get the blade down onto the glass if that makes sense

even tried an ice scraper , that was useless too :D
 
Magicgrotto said:
Stickyer than sticky stuff it seams :eek::eek::rolleyes::rolleyes::rolleyes:
Click to expand...

i bloody blame blue peter giving these companies the one i prepared earlier and the double side tape :mad::mad::(

bloody stuff , is enough to make a vicar swear whilst bending over a parishioner on sunday mornings whilst soaking ur self in holy water :eek::D
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
F
What have you done with your series today?
Replies
4
Views
1K
Frustrated Seriesist
F
L
SOLD - Land Rover Ninety (Defender 90) 300TDi Auto soft-top
Replies
9
Views
5K
mondifa
M
I
Disco 2 Central Locking Issue on a 1999 Disco 2
Replies
5
Views
1K
sierrafery
sierrafery
R
Oh dear, what have I done......?
2 3
Replies
47
Views
6K
Rallymantony
R