So thats the new injector loom and rocker cover gasket fitted, red plug cleaned out again which i will repeat every weekend now until clear..

What next i wonder.. I think new front shocks because Traction control activates each time i go over a bump in the road.. its the front N/S but may as well change both

Nige
 
You'd be surprised how much is packed into a silencer box.. your landy might cough up a few more before it done lol.. down side is that stuff is restricting your exhaust while it works it way out, and how much is snagged in the pipes

Nige
what is it?
 
Because I've only been up since half three this morning for work I had a play when I got home :D
DSC_0482.JPG

DSC_0484.JPG
DSC_0485.JPG
DSC_0486.JPG

Swapped all four doors over and took both front wings, indicators and head lights of the rust bucket and put them on the project :D:D
 
Stripped the old mud flap bracket off, bit of rot in the inner arch so need to get some new metal in to attach new bracket


20180527_131048.jpg
20180527_120326.jpg


Little hole in the outer wing as well at the bottom of the plastic arch trim :(

20180527_124859.jpg


Bodged that one with some Quicksteel aluminium epoxy :oops: camping in bewdley tomorrow for 3 nights so the rest will have to wait til next week. Cutting discs and 2mm steel on order, havent got a welder though so think it's get someone to come and do it or rivet the plate on with plenty of tigerseal as well :confused: any other suggestions? Tek screws?? :D
 
Does the disco 1 and 2 have inner plastic wheel arches to protect the metal wheel arch form water jetted at it at speed when yer driving?
 
Does the disco 1 and 2 have inner plastic wheel arches to protect the metal wheel arch form water jetted at it at speed when yer driving?
D1's have a plastic inner wing between the wing itself and the metal inner wing, same really on the back but they are prone to rot where the plastic fixings are.
 
Walking through the garden centre yesterday saw some Swarfega Degreaser and thought i would give it a go as it was really cheep at £6.99.. now the injector loom has been done and new rocker cover gasket fitted the engine needed a good clean, not just so it looks good, but to make it easier to spot any new leaks..

Real easy to use, just sprayed it on, left it for 5 mins, used a paint brush on the most stubborn bits and washed off with the hose pipe.. It did a good job I think.

fx9ipY2.jpg


EzYiK8t.jpg


Nige
 

Similar threads