1988smithy said:
great stuff, glad the hard work is paying off :)
Click to expand...

many thks , felt like a new motor in how nice it drove , especially these disco being large vehicles there was hardly any body roll round corners

am well chuffed and sounds sad but really enjoying working on it, yep, need to get out more, lol

should have it done up to the routine basic service items by the end of this year

Got left

rear suspension rebuild
4 x wheel laser alignment
full brake and EPB rebuild , new discs / pads / pad sensors
full service , inc software reflash updates for transfer and auto box
air compressor plastic silencer

currently messing around with a fitting on the FBH fuel line that’s slightly leaking , was tucked away and found it when i removed the wheel arch liners

88CF6FDD-CB7B-46D3-9880-AC98D12C5AC5.jpeg
 
gstuart said:
am well chuffed and sounds sad but really enjoying working on it, yep, need to get out more, lol
Click to expand...

better than spending your time and money in a **** boozer or down the bookies :D, ive missed messing about with mine with this house move :oops: got a few jobs lined up but not going to be as busy as you! ill try and get pics up as i do them, i love seeing what others are up to

really are sad arent we ;)
 
1988smithy said:
better than spending your time and money in a **** boozer or down the bookies :D, ive missed messing about with mine with this house move :oops: got a few jobs lined up but not going to be as busy as you! ill try and get pics up as i do them, i love seeing what others are up to

really are sad arent we ;)
Click to expand...

indeed, don’t pub it and never gambled in my life :)

originally bought this as a project and am the same, is good seeing what others are doing , inc picking up some great tips etc along the way

have had to buy more tools with this disco seeing it has heavier duty parts , plus enjoyed learning new things along the way , just take my time and like all of us here do the job properly

what work u got on ur disco plse , ah yes moving , nothing like a bit of added stress, lol
 
gstuart said:
now that looks like real fun , ;):eek:
Click to expand...
Not a bad job to be honest, air powered impact gun makes life easier and having the correct uj attachment for it. Next job is dislocation cones on the rear but I have bought another project :oops:which I collect in a couple of weeks.
 
Marmaduke said:
Not a bad job to be honest, air powered impact gun makes life easier and having the correct uj attachment for it. Next job is dislocation cones on the rear but I have bought another project :oops:which I collect in a couple of weeks.
Click to expand...

those impact guns are indeed extremely useful, tried mine out for the first time the other day and what a blessing, saves struggling on the end of a bar, also looking at all the different air tools now available

Daft question if i may , what’s the dislocation cone, is it to do with the coils plse ???

u know ur have to just buy another house with more land for the collection, lol
 
gstuart said:
those impact guns are indeed extremely useful, tried mine out for the first time the other day and what a blessing, saves struggling on the end of a bar

Daft question if i may , what’s the dislocation cone, is it to do with the coils plse ???

u know ur have to just buy another house with more land for the collection, lol
Click to expand...
Dislocation cones allow the springs to relocate during articulation off roading helping you to avoid this happening :oops:

DSC_0274.JPG


Our next house will have a garage but we're back down to two and a half cars at the moment :p
 
Marmaduke said:
Dislocation cones allow the springs to relocate during articulation off roading helping you to avoid this happening :oops:

View attachment 148870

Our next house will have a garage but we're back down to two and a half cars at the moment :p
Click to expand...

cheers , wow , don’t tell me i may have got something right for a change , lol

maybe u could build a landy kit with them, always remember there used to be fibreglass body kits that used discovery chassis’s , alas can’t remember the name of them as it was a good few years back

I wonder how many landies it will take before ur beloved says NO, lol
 
gstuart said:
cheers , wow , don’t tell me i may have got something right for a change , lol

maybe u could build a landy kit with them, always remember there used to be fibreglass body kits that used discovery chassis’s , alas can’t remember the name of them as it was a good few years back

I wonder how many landies it will take before ur beloved says NO, lol
Click to expand...
Until I start losing money on them:D
I did see one earlier that was a twelve hour drive away which she didn't seem to keen on :oops:
 
Marmaduke said:
Until I start losing money on them:D
I did see one earlier that was a twelve hour drive away which she didn't seem to keen on :oops:
Click to expand...

careful if u go on a long journey , as SWMBO could use that time for shoe shopping , with ur credit card, lol

shame ur too far away as i would have really liked seeing them without the chassis etc
 
gstuart said:
careful if u go on a long journey , as SWMBO could use that time for shoe shopping , with ur credit card, lol

shame ur too far away as i would have really liked seeing them without the chassis etc
Click to expand...
I'll take you some photos the next time I do one, might be doing a D2 as someone told me the other day that they were desperate for a decent chassis for one..... Ker-ching :p
Oh and two kids at uni cost way more than a wife:oops:
 
Finished off fitting new brake line and flexible hose on the front passenger side. Getting the front driver side ready for when the flexible hose comes tomorrow. The franklin flaring tool works well.
Flexihose.jpg
Brake pipe.jpg
 
Been having a few minor issues with performance and last week a weird staring issue and the Landy going into limp mode with M&S lights flashing.. Having read a few posts on here and searching YouTube I decided I should check the Red plug to the ECU... I was not shocked to find oil, in fact I was kind of hoping there was oil as it would explain the issues... but i was shocked at just how bad it was..

kZww6VR.jpg


The plug to the injector loom was worse
HOzddnt.jpg


So I got to work with some electrical contact cleaner, cotton buds and copious amounts of kitchen roll (don't tell the wife) and cleaned away all the oil.. I then decided to check inside the ECU fearing it would be flooded with oil.. It wasn't, only the tiniest spec of oil visible.
oHlSGA5.jpg



Took the girl for a spin afterwards and what a difference, runs smoother, tons more power and the bottom end (although I don't know why)
Not changed the injector loom yet, have one ordered along with a new rocker cover gasket which i will fit next week..

Now I'm about to climb underneath to replace the worn drag link end.. (wish me luck)

Nige
 
Drag link ball joint done.. nice and easy if not a little messy... steering is spot on now :)

Checked all water and oil levels, and gave her a ruddy good power washing...

Nige
 
Nige4927 said:
Took the girl for a spin afterwards and what a difference, runs smoother, tons more power and the bottom end (although I don't know why)
Click to expand...
As you're probably thinking, "Engine oil is an insulator, and the contamination runs down the inside of the wires". Basically that's true, but it isn't really the oil which does the damage, it's the contaminants in the oil such as the carbon and minute metal fragments which once they get into a connector they start to add resistive connections and electrical leakage where there should be none.
 
Bought 300tdi disco yesterday, checked transfer box and axles both errrrrrrr were pretty low on oil, topped them all up with 1.25 litres of ep90.

Bit quiter now!
 
gstuart said:
what work u got on ur disco plse , ah yes moving , nothing like a bit of added stress, lol
Click to expand...

Nothing too heavy, really need to get the chassis prepped and painted and some sort of product injected inside it.
Got a rusted through mudflap bracket to replace, snapped headlight fixing to drill out and tap, bit of rusty paintwork on sills and above windscreen and replace all the drivetrain oils.
House move while stressful was well worth it as I've now got my own drive to work on as opposed to a car park and a decent sized garage. Trying to convince the wife we need a carport as well :rolleyes: then I can get a series landy :D
 
1988smithy said:
Nothing too heavy, really need to get the chassis prepped and painted and some sort of product injected inside it.
Got a rusted through mudflap bracket to replace, snapped headlight fixing to drill out and tap, bit of rusty paintwork on sills and above windscreen and replace all the drivetrain oils.
House move while stressful was well worth it as I've now got my own drive to work on as opposed to a car park and a decent sized garage. Trying to convince the wife we need a carport as well :rolleyes: then I can get a series landy :D
Click to expand...
Yes you to can have a series 2a chassis leaning on your car port for nearly two years :oops:
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
F
What have you done with your series today?
Replies
4
Views
1K
Frustrated Seriesist
F
L
SOLD - Land Rover Ninety (Defender 90) 300TDi Auto soft-top
Replies
9
Views
4K
mondifa
M
I
Disco 2 Central Locking Issue on a 1999 Disco 2
Replies
5
Views
995
sierrafery
sierrafery
R
Oh dear, what have I done......?
2 3
Replies
47
Views
5K
Rallymantony
R