Could also be the 16-pin connector on the HEVAC failing ? I definitely need to replace the connector on my Green P38. All the motors & potentiometers test ok with a 9V battery & the flaps are def not sticking.My book symbol has gone again.
Question- would I be right in thinking that, for example, a sticky flap would bring up the book and ,without touching anything on the hvac , the next start will clear the book until I adjust something again?
2001 my. Changed my passenger side mirror glass this morning so now have both new heated mirrors working. Another issue occurred also this morning , ign on, to set the passenger mirror and the gearbox cooler fan runs, it has also started the last couple of times I've plugged the nano in, again, engine not running, just ign on for hvac testing.
It's a bit bizarre to be fair.Could also be the 16-pin connector on the HEVAC failing ? I definitely need to replace the connector on my Green P38. All the motors & potentiometers test ok with a 9V battery & the flaps are def not sticking.
The hevac not only reads the pot value but also the current draw. If it's near the upper limit then maybe it pulls slightly extra current under certain conditions and trips the book symbol.Could also be the 16-pin connector on the HEVAC failing ? I definitely need to replace the connector on my Green P38. All the motors & potentiometers test ok with a 9V battery & the flaps are def not sticking.
That is not how I understand it. If the HEVAC is expecting a certain value from the blend motor pot and the return is incorrect, the fault will stay there. However the act of starting may dislodge a sticky flap allowing it to move to the correct position at which point the book will disappear.My book symbol has gone again.
Question- would I be right in thinking that, for example, a sticky flap would bring up the book and ,without touching anything on the hvac , the next start will clear the book until I adjust something again?
2001 my. Changed my passenger side mirror glass this morning so now have both new heated mirrors working. Another issue occurred also this morning , ign on, to set the passenger mirror and the gearbox cooler fan runs, it has also started the last couple of times I've plugged the nano in, again, engine not running, just ign on for hvac testing.
Current sensing on the blend motors? I'll have to check but I do not think so.The hevac not only reads the pot value but also the current draw. If it's near the upper limit then maybe it pulls slightly extra current under certain conditions and trips the book symbol.
Good luck with that, I remember the UK MOT garages always finding a fault and being disappointed when I took the vehicle away to DIY the repair. Here they test stations are independent and not part of a garage.Got me MOT due in September but found out yesterday the place I have always used for many years now got burnt to he ground a couple of months back.. As Tony the owner is in his 80's and his son is now 60 it doesn't look like they will be reopening. Got to start having a really good look around as some of the garages are very unreliable near abouts. Tony was just a MOT tester and not after repair work so was very fair.
If he keeps his MOT license, Can't you just Paypal him the money and he can post you the sticker???Got me MOT due in September but found out yesterday the place I have always used for many years now got burnt to he ground a couple of months back.. As Tony the owner is in his 80's and his son is now 60 it doesn't look like they will be reopening. Got to start having a really good look around as some of the garages are very unreliable near abouts. Tony was just a MOT tester and not after repair work so was very fair.
you can download the current list of MOT stations then import into excel, filter by town and class (4)Got me MOT due in September but found out yesterday the place I have always used for many years now got burnt to he ground a couple of months back.. As Tony the owner is in his 80's and his son is now 60 it doesn't look like they will be reopening. Got to start having a really good look around as some of the garages are very unreliable near abouts. Tony was just a MOT tester and not after repair work so was very fair.
You like your excel don't youyou can download the current list of MOT stations then import into excel, filter by town and class (4)