Started stripping down the other side in prep for change of seals and bearings on the front hub, suprisingly easy, same as the other side no bolts seized, even the brake joints came apart lovely. 3/4 of the way to finishing it off, seals and bearings changed. Too cold to carry on much longer so with luck finish tomorrow between other things. Might as well do a brake fluid change to finish it all off.
 
RangeRoller dt said:
Had a sort of clanging lately like front exh pipe is loose? Obviously pipe is okay, looked underneath at the exhaust manifold area - all looks clean so guessing that’s not leaking. Only other thing can think of in that area is the dmf :eek:
Win for today finish putting it back together tomorrow
Click to expand...

Heat shield above the exhaust and under the driver's seat? UJs?!
 
Lose my **** with it. Yesterday the MFD started saying driver window not set. Couldn't be arsed to set it figured I'd sort it today. Came out of work, car unlocks. Drivers doesn't. For some reason the car doesn't appear to recognise its existence. Locks unlocks with key in the door, but doesn't activate central locking, windows don't work, speaker is silent. I can only assume the loom is broken somewhere. ****ing Landies man, pain in the tits.
 
Bix said:
Lose my **** with it. Yesterday the MFD started saying driver window not set. Couldn't be arsed to set it figured I'd sort it today. Came out of work, car unlocks. Drivers doesn't. For some reason the car doesn't appear to recognise its existence. Locks unlocks with key in the door, but doesn't activate central locking, windows don't work, speaker is silent. I can only assume the loom is broken somewhere. ****ing Landies man, pain in the tits.
Click to expand...
Loom between the a post and door, or just possibly a duff outstation.
 
Bix said:
Think we still have a spare outstation from Chloe's being suspect, so I'll dig around and see if that fixes it. Really hate hunting wiring faults. Especially when it is this cold.
Click to expand...
Even down here it's freezing cold so I sympathise. I'm afraid the loom is the most likely cause.
 
My trusted mechanic installed new OE water pump, changed oil and filter, found and fixed the burst EAS line to air tank. Took an aeon to purge all the air out of the coolant pathways...longer than other tasks combined. I supplied the water pump and the oil. Cost £80 cash for labour and new oil filter. Later, I removed the shraeder valves feeding individual airsprings and recommissioned EAS. I was talking on phone at the time and got front lines in the wrong holes (awaiting John's comment on that one). Also need to extend rear lines by a couple of inches. Will do that tomorrow. Very happy bunny tonight...even happier tomorrow night when all squared up. Time to crack open a bottle of Shiraz methinks :~}
 
Bix said:
Lose my **** with it. Yesterday the MFD started saying driver window not set. Couldn't be arsed to set it figured I'd sort it today. Came out of work, car unlocks. Drivers doesn't. For some reason the car doesn't appear to recognise its existence. Locks unlocks with key in the door, but doesn't activate central locking, windows don't work, speaker is silent. I can only assume the loom is broken somewhere. ****ing Landies man, pain in the tits.
Click to expand...
Its the green oval curse:D
 
Jon Dor said:
My trusted mechanic installed new OE water pump, changed oil and filter, found and fixed the burst EAS line to air tank. Took an aeon to purge all the air out of the coolant pathways...longer than other tasks combined. I supplied the water pump and the oil. Cost £80 cash for labour and new oil filter. Later, I removed the shraeder valves feeding individual airsprings and recommissioned EAS. I was talking on phone at the time and got front lines in the wrong holes (awaiting John's comment on that one). Also need to extend rear lines by a couple of inches. Will do that tomorrow. Very happy bunny tonight...even happier tomorrow night when all squared up. Time to crack open a bottle of Shiraz methinks :~}
Click to expand...
Me Comment :rolleyes::rolleyes::rolleyes: Heaven for bid Oh go on then:D Just be careful who's wrong hole it is next time:rolleyes:
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
2K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
533
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
717
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
799
Grrrrrr
Grrrrrr