I swopped out the ignition swith on mine to eliminate an intermitent no turn over of the engine.. have concluded its the starter solinoid sooooo went for a drive to meet.up with my.mate whos m62 engine we rebuilt i gave him a master class in paint correction and detailing...he is now hooked lol
His is the black one
20190403_135331.jpg
 
Blatant plug..! (Shoot me.)
Just listed my diesel engine pump timing tools here and on the Bay.
(Can't see where on a V8 I can stick 'em now, so not much use to me...)
Bay No 323765912648
 
Last edited:
You can use it under the bonnet to improve a V8 :p You just pull it out and stick the doozle in :D

Don't know what that is but it doesn't work as a link, can't copy, and if I touch it tries to ring it as a phone number then my phone crashes :confused::eek:
 
RangeRoller dt said:
You can use it under the bonnet to improve a V8 :p You just pull it out and stick the doozle in :D

Don't know what that is but it doesn't work as a link, can't copy, and if I touch it tries to ring it as a phone number then my phone crashes :confused::eek:
Click to expand...
:p:p:p:p.. copy the number then put it in the Bay search bar as an item search..
Not sure how to do a page link on here.
 
 
Last edited:
biketeacherdave said:
I swopped out the ignition swith on mine to eliminate an intermitent no turn over of the engine.. have concluded its the starter solinoid sooooo went for a drive to meet.up with my.mate whos m62 engine we rebuilt i gave him a master class in paint correction and detailing...he is now hooked lol
His is the black one
View attachment 174243
Click to expand...

Nice pair ;)

What products do you use during a correction?

paint looks MINT! ;)
 
 
It is MOT time again for my P38. The fourth one in my ownership and another pass first time. Good to have a decent mooch underneath on a proper hoist, there are a few areas that would benefit from a clean and Waxoyling before the surface rust gets any worse. Celebrated our 'ticket' by getting the caravan out of storage on the same day.
 
Just replaced rear discs and pads on my P38,I had to drill out both disc retaining screws which only took minutes with a new drill bit, Front ones are next on the list.
 
Few sharp clouts with a large hammer before hand usually helps to break it free a little. Works on adjustable spanners too.
Then punch if she won't come. Some people just put wheels back on without new one but I wouldn't do that they are pennies.
 
Beat the rear calipers over the head with my pressure bleeder for the third time today and finally managed to get good pressure on the pedal.:):)
I had replaced both rear calipers on Thursday but had trouble getting the last air out of the system, and of course being me I found I had ordered the wrong calipers, metric instead of imperial, as luck would have it I did have a few metric fittings kicking around but soon found that my flare tool wasn't up to the job on the existing steel (bundy ?) tube so had to then make up new copper alloy rear brake lines.:(:(.
One good thing though, all threads came apart with no trouble, just to be sure for the future everything went back together with a smear of copper coat.
 
Mot time again passed with flying colours. Not even oil leak advisory ( and yes there is oil in it). Italian tune up beforehand and passed emissions with flying colours as well. Happy bunny.

So whilst in overalls decided to totally strip my other engine that went fubar. Few pics on what I found.
No 1 piston crown
No1 piston underside
No 1 conrod
No1 cylinder head
20190406_105101.jpg
20190406_105107.jpg
 

Attachments

  • 20190406_105120.jpg
    20190406_105120.jpg
    296.3 KB · Views: 213
  • 20190406_105130.jpg
    20190406_105130.jpg
    291.5 KB · Views: 191
Bagshot said:
Cheepo handheld impact driver works for me every time. Beat it to death and out..
Click to expand...
Tried that but the previous owner had chewed the screw heads up , cant be sure whether he managed to get them out and put them back in (w*%ker) or gave up when he couldn't get them out
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
11
Views
692
brasso
brasso
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
393
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
688
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
734
Grrrrrr
Grrrrrr