Henry_b · Nov 8, 2019

300bhp/ton said:
So as my 4.6 is back on the road and I had found a new app in the App Store I thought I'd give it a try out.

No idea if this is good or bad though, nothing to compare it too

View attachment 193681

The bushes in the rear radius arms I'd put them on the list too.

Rear anti roll bar too.

That app looks interesting.

What's the 0-60?

Mine was 9.4 when I did one.

300bhp/ton · Nov 8, 2019

Thanks.

Haven’t done 0-60mph yet. Mostly because it can vary too much depending on surface and driver. Is also a bit brutal on the vehicle. May give it a go. But not yet.

Dopey · Nov 8, 2019

Acceleration was very nice today, went like stink, must be the cold with the turbo and intercooler (its been replaced for a much larger one)

Dopey · Nov 8, 2019

I see one of them Freelanders 3 on the M4 M25... looked like it was on bump stops, bobbing up and down, and low to the ground, didn't know they had air bags??

Henry_b · Nov 8, 2019

I ease into the throttle 300,.

Makes for a less brutal launch.

Dopey · Nov 8, 2019

Had an accident in the truck today, ripped the pax side mirror and fu*ked his paint job up on the n/s wing, but the truck was fine, he thought my lane was his!!

300bhp/ton · Nov 8, 2019

Henry_b said:
I ease into the throttle 300,.

Makes for a less brutal launch.

Yeah I’ve done a few in the past. But how you get off the line can make such a huge difference to the stat. Which is why I elected to opt for rolling start stats. Will be interesting to see how my Tdi pick up compares.

Henry_b · Nov 8, 2019

300bhp/ton said:
Yeah I’ve done a few in the past. But how you get off the line can make such a huge difference to the stat. Which is why I elected to opt for rolling start stats. Will be interesting to see how my Tdi pick up compares.

I think the RR will be quicker

Mine felt quite grunty.

Nice noise too.

Need to get it back on the road!

Rubberknees · Nov 9, 2019

Dopey said:
Had an accident in the truck today, ripped the pax side mirror and fu*ked his paint job up on the n/s wing, but the truck was fine, he thought my lane was his!!

OOOps done it again

My missis is good at hitting wing mirrors

Dopey · Nov 9, 2019

kermit_rr · Nov 9, 2019

Got a new radiator cap! The last new one fell to pieces when i took it off

Datatek · Nov 9, 2019

Dopey said:

Just been reading a French report on the new Defender (Pretender). Engines up to 500bhp, prices up to €100,000,
no manual gearbox, no mention of low range or engine orientation, angle of attack and departure much inferior to the old Defender, coil or air all independent suspension and load of electronics. No doubt it will impress on the school run.

Grrrrrr · Nov 10, 2019

300bhp/ton said:
So as my 4.6 is back on the road and I had found a new app in the App Store I thought I'd give it a try out.

No idea if this is good or bad though, nothing to compare it too

View attachment 193681

Ian Hawkins Torque app does 0-60 etc. If you pay for the pro version it has an overlay with you video feed with rev counters and whatever you like. You just need the little Bluetooth ODB thingy. Obviously that won't do much on the oil burner. Ian lives by you near MK.

Grrrrrr · Nov 10, 2019

300bhp/ton said:
Yes only just converted to coils. Hadn't driven on the road until 2 days ago. Need to have a crawl under tomorrow and see if I can sport what it is. Don't think it is anything too nasty (fingers crossed!!!)

View attachment 193675

Wondered if a coil had snapped. Or something loose at top.

Henry_b · Nov 10, 2019

painted the rocker covers

Tenebreaux · Nov 10, 2019

Grrrrrr said:
Ian Hawkins Torque app does 0-60 etc. If you pay for the pro version it has an overlay with you video feed with rev counters and whatever you like. You just need the little Bluetooth ODB thingy. Obviously that won't do much on the oil burner. Ian lives by you near MK.

One of only two Android apps I've ever paid for.

I fitted new headlight, main beam and a sidelight bulb. And realised for the first time that the previous owner, for some bizarre reason, has wired the crappy spots into the sidelights.

aj1954 · Nov 11, 2019

Tenebreaux said:
One of only two Android apps I've ever paid for.

I fitted new headlight, main beam and a sidelight bulb. And realised for the first time that the previous owner, for some bizarre reason, has wired the crappy spots into the sidelights.

Whenever I fitted spots to a motor I wired em to main beam.

Tenebreaux · Nov 11, 2019

aj1954 said:
Whenever I fitted spots to a motor I wired em to main beam.

Yep, that's the sensible way. I can't understand why anyone would connect them to the sidelights.

Dopey · Nov 11, 2019

I cant understand why you wouldn't put spots on a separate switch anyway

Tenebreaux · Nov 11, 2019

Dopey said:
I cant understand why you wouldn't put spots on a separate switch anyway

I have a light bar to put on when I can get round to it. Plan is to wire the relay into main beam and have a cut out switch on the dash.

Think outside, no box required.

Well-Known Member

Well-Known Member

Well-Known Member

Think outside, no box required.

Well-Known Member

Well-Known Member

Think outside, no box required.

Well-Known Member

Well-Known Member

Very

Well-Known Member

Technician, Bodgit & Scarper Ltd

Technician, Bodgit & Scarper Ltd

Think outside, no box required.

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads