Use her to move into the new apartment... I feel out of place around here. Also, the arch way in and out are tight as ****. I am millimetres away either side.
 

Attachments

  • 20180512_060538.jpg
    20180512_060538.jpg
    204.9 KB · Views: 172
replaced the two vertical rubberised pieces that bubble at the edges of the front side windows. Only replaced the vertical pieces. looks much better. looking now for two more to do the rears. Cost £5.00 each side.
 
Replaced EAS Compressor after original one decided to self destruct on Friday,all good again now.
Also fitted new rear pads and checked front pads.
 
Been looking to see why the drivers side carpet keeps getting wet .
Found water has been dripping off the blower so silicone up them rusty screws in where the pollen fillter lives as a temp fix .
Now playing hunt the reversing sensor box of electrics .
 
Been looking to see why the drivers side carpet keeps getting wet .
Found water has been dripping off the blower so silicone up them rusty screws in where the pollen fillter lives as a temp fix .
Now playing hunt the reversing sensor box of electrics .

You need these then. AWR1675 DA610065L :)
 
I did them without removing the whole scuttle etc. Just a bit of undoing some screws and gentle opening of gap to change it. No silicone used, just the new screw and clip done up snug.

Its the hole where the water leaks in. The foam on the clip perishes and allows water in.
 
replaced the two vertical rubberised pieces that bubble at the edges of the front side windows. Only replaced the vertical pieces. looks much better. looking now for two more to do the rears. Cost £5.00 each side.
Liking the sound of this, didn't even know they could be replaced, never mind sourced.. Gonna take a second look at mine. ( When the engine is back together, obviously..)
 
replaced the two vertical rubberised pieces that bubble at the edges of the front side windows. Only replaced the vertical pieces. looks much better. looking now for two more to do the rears. Cost £5.00 each side.

That's a good idea. MIne are bubbling. And the plastic at the bottom of the rear right window on mine is loose!
 
I have had a look and I reckon that rear window trim along the top is the same as the vertical trim.I used polyurethane adhesive to fill the joint at the top.
 
if you look for complete ones, no, everyone wants a fortune for them. but if you look for ones that have bubbled like yours and use the top run from the rear windows you should be able to buy them at a reasonable price
 
Someone was asking me about Parking Sensors. The ones on mine are Brees. Never heard of them but they were going cheap at the time. They have a visual display showing left and right distance bars as well as the beeping.
 

Similar threads