domino said:
It's more like blutac - it pulls grit and dirt out of the paint, as long as you've used lube, it doesn't affect the paintwork at all.
Click to expand...

We use the bilt hamber clay. we have used autoglym too, and nothing wrong with either - the bilt hamber is better value in our experience.

IMHO it is not abrasive - it is sticky. its called "clay" - but I doubt it comes out of the ground. Proper lube is paramount ( isn't it always :D) - and we use autoglym rapid detailer, but there are literally hundreds of different ones, from Dodo Juice to .... your favourite search engine will enlighten you..

It does not affect paint work at all - only removes all the little bits of grit and crud from it - in basic terms, the paint will feel new after being clayed.

And defo use the two bucket wash method - unless you do, you are not washing the car, you are trashing the paint:rolleyes:

As well as you tube, you'll find a mass of useful information over on:-

www.detailingworld.co.uk

including at least two members off here !!
 
Disco1BFG said:
We use the bilt hamber clay. we have used autoglym too, and nothing wrong with either - the bilt hamber is better value in our experience.

IMHO it is not abrasive - it is sticky. its called "clay" - but I doubt it comes out of the ground. Proper lube is paramount ( isn't it always :D) - and we use autoglym rapid detailer, but there are literally hundreds of different ones, from Dodo Juice to .... your favourite search engine will enlighten you..

It does not affect paint work at all - only removes all the little bits of grit and crud from it - in basic terms, the paint will feel new after being clayed.

And defo use the two bucket wash method - unless you do, you are not washing the car, you are trashing the paint:rolleyes:

As well as you tube, you'll find a mass of useful information over on:-

www.detailingworld.co.uk

including at least two members off here !!
Click to expand...
What is the two bucket method mate?
 
I have also used Iron-X to pull the iron out of the paintwork before using a clay bar. Very weird watching it go pink as it reacts. Its also the mutts nuts for getting your wheels clean its what I primarily use it for.
 
Old diver said:
What is the two bucket method mate?
Click to expand...

This slightly bonkers, (in the nicest possible way ), but pretty funny guy, on yu toob, will show you how ......:)



He has a lot of very useful videos up about paint correction and such too - is acknowledged within the detailing world as something of a guru.:)
 
Last edited:
Radio on, switched on lights and radio moves to screen only and nothing works.
Switch off lights and all back to normal.
Is there a feed of lights that lights up the radio or does something else.
Safe a lot of time if any info on this but should get it sorted with multimeter.
 
I washed her cleaned the inside and as I really have nothing to fix apart from the 47 point to do list got out the chip paint and touched up the chips in the door jams.
 
Think having all the windows open on my journey back from Wales has made the head lining suffer. It's gone really saggy at nearside rear :(
 
domino said:
Think having all the windows open on my journey back from Wales has made the head lining suffer. It's gone really saggy at nearside rear :(
Click to expand...
You can make a cut into it (is it the original liner?) and get spray glue and patch it back, it will hold for a bit, but seems you might have to replace it, not a bad job to do, but will take 1/2 a day
 
domino said:
Think having all the windows open on my journey back from Wales has made the head lining suffer. It's gone really saggy at nearside rear :(
Click to expand...

wait for it to go at the front. Be easier when you do it. Not a bad job at all.
 
Headliner is abit of a pain to change but the end result will honestly make you wonder why you didn't do it years ago!
 
Was planning a cut and spray mount/glue. It's more like a big bubble...but looks awful.

Just don't have the space to do a replacement myself :(
 
You can do it outside your house, only room you need is to lay it flat, if you have that, then you have the room
domino said:
Was planning a cut and spray mount/glue. It's more like a big bubble...but looks awful.

Just don't have the space to do a replacement myself :(
Click to expand...
 
Replaced the viscous fan, thanks to a post a read on here some time ago that it would need to be changed at some point.

Runs cooler than it ever did, and roars like a champ now ;)
 
Jake Hewitt said:
Replaced the viscous fan, thanks to a post a read on here some time ago that it would need to be changed at some point.

Runs cooler than it ever did, and roars like a champ now ;)
Click to expand...
Should only roar for few seconds pulling away when cold. If it's roaring all the time you have problems.
 
What I did to my RR today?

I drove it like a boss :cool:

Air Con on freeze the nuts off, stereo on 26 (stock speakers are "HOLY SH!T" awesome) and foot down on way to/from work.

George is the best car I have ever owned in as much as she is immaculate and nothing needs upgrading.

I keep being told the colour is unusual and really suits her.

Range Rover, YEAH! :D
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
2K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
535
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
717
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
801
Grrrrrr
Grrrrrr