You might as well have put that in Cyrillic script.
Broken wire sonewhere in the canbus thingy?
Yes i think that's likely. The diag recommends doing a vehicle factory reset.. reluctant to do it though as i don't know what it actually means
Disconnect battery wait 5 minutes then touch positive and negative cable on car together for few seconds simple, it will power down everything so everything restarts works in few cars nowadays had to do it not long ago on friends Mondeo when remote wouldn't talk to car after battery change.
If you remember short while ago got drivers side blower working . Today took of passenger side one and rebuilt a good un out of the bits and pieces. Wow never realised they could blow so much. Even re circulation flaps are working now. Air con a tad low on pressure so ordered new top up can and touch wood (please LR gods) everything should be working as it should 
What did that set you back?
Off to see a land-rover Saturday 
..
On English plates so it may go for parts unless it's wanted for someone else to go through the bother of French plating it... It's a nightmare now over here and expensive to boot
..On English plates so it may go for parts unless it's wanted for someone else to go through the bother of French plating it... It's a nightmare now over here and expensive to boot
badfluffy
Well-Known Member
no idea untill they send the bill to the accountantWhat did that set you back?
Datatek
Well-Known Member
Work of the devil, I replaced the DMF on my Transit with a solid flywheel and a special clutch assembly.
If its cheap enough it has a lot of valuable parts in the EU.Off to see a land-rover Saturday
On English plates so it may go for parts unless it's wanted for someone else to go through the bother of French plating it... It's a nightmare now over here and expensive to boot
Have to agree its a bit of a minefield since the B word.
J
badfluffy
Well-Known Member
been trying one of those on it for last 6 months going back to dual mass
Datatek
Well-Known Member
Why? Did you fit the correct clutch with the solid?
badfluffy
Well-Known Member
came as a complete kit, took 3 attempts to even get it fitted right
Certain vehicles don't take to the vibration from the engine.
Our Volvo v50 has a solid conversation kit and rattles the crap out of the gearbox.. That's going back on a dual mass flywheel and clutch when the time is right
1500€
b word is right
Datatek
Well-Known Member
That doesn't sound good. The Transit one went straight on no problem, it's been there a long time now, £280 for the solid kit, close to €1000 for the DMF kit over here so no contest.
5 cylinder?Certain vehicles don't take to the vibration from the engine.
Our Volvo v50 has a solid conversation kit and rattles the crap out of the gearbox.. That's going back on a dual mass flywheel and clutch when the time is right
Datatek
Well-Known Member
A spare HEVAC? It was never cheap registering a car in France but with all the emissions crap it is now very expensive.Off to see a land-rover Saturday
On English plates so it may go for parts unless it's wanted for someone else to go through the bother of French plating it... It's a nightmare now over here and expensive to boot
If you buy it to break, I might be interested in the rear bumper if it's the twin exhaust model
4ctl 2.0 hdi peugeot engine Keith
