upload_2022-12-20_10-28-10.png
 
And i only had set a 4500 budget inc travelling for one so i had spare money for once it was home
 
Last edited:
Had to replace the driver's door handle on project P38 today. Need the key lock working because battery is off at moment !!

Was a bit of a faff getting the lock barrels out to swap over, but got there in the end, so now have new (eBay) handle with original key.

Shame nobody seems to have the bit that breaks available. There's even a few broken handles selling on eBay at moment, so always check pictures !!

upload_2022-12-21_16-52-34.png
 
Found out the reversing sensors don't turn off when you connect a trailer.. that's not fun! At least you have the button to turn them off manually
 
Found out the reversing sensors don't turn off when you connect a trailer.. that's not fun! At least you have the button to turn them off manually
My td6 the rears would turn off with a trailer on aslong as it wasnt led lights on the trailer, front sensors still worked and the park sensor light would come on as normal,
 
My td6 the rears would turn off with a trailer on aslong as it wasnt led lights on the trailer, front sensors still worked and the park sensor light would come on as normal,
Would take a moment to recognise trailer was on if you connected with vehicle running it uses the bulb check on the rear sidelight circuit to determine a trailer attached so if the motor was running it wouldnt notice till it did a bulb check pulse, the suspension would also self lock in normal height with trailer attached, suspension lock light would come on and if you tried to adjust height it would say trailer mode and not allow the move,

I used to load car trailer on in access height motor running and plug it in and flick sidelights on and it would reconise the trailer and lift itself up and then kill the rear park sensors,

I know that was a 2003 and kermits is a 2012 but its possible they act the same
 
Any ideas what the lil plug/sensor fingymebob is in the spare wheel well on me l322? On the right hand side towards the front, there's a bracket with a wire going to it, but doesn't seem to do anything.. maybe it's for an optional extra but i can't think what in the boot space!
 
Any ideas what the lil plug/sensor fingymebob is in the spare wheel well on me l322? On the right hand side towards the front, there's a bracket with a wire going to it, but doesn't seem to do anything.. maybe it's for an optional extra but i can't think what in the boot space!

Some kind of amp? Maybe for upgraded stereo?
 
Would take a moment to recognise trailer was on if you connected with vehicle running it uses the bulb check on the rear sidelight circuit to determine a trailer attached so if the motor was running it wouldnt notice till it did a bulb check pulse, the suspension would also self lock in normal height with trailer attached, suspension lock light would come on and if you tried to adjust height it would say trailer mode and not allow the move,

I used to load car trailer on in access height motor running and plug it in and flick sidelights on and it would reconise the trailer and lift itself up and then kill the rear park sensors,

I know that was a 2003 and kermits is a 2012 but its possible they act the same
That only applies if the correct JLR trailer loom and ECU is installed
 

Similar threads