New Ring Automotive RSC806 Smart Battery Charger arrived this afternoon and battery now up to 12.94v. It's a nice constant voltage, none of that pulsing crap.
New Ring Automotive RSC806 Smart Battery Charger arrived this afternoon and battery now up to 12.94v. It's a nice constant voltage, none of that pulsing crap.
tomcat59alan
Well-Known Member
What's the voltage when its been off charge for a while?
Normally about 12.6v but I think the new cheapo chinese FBH remote keeps kicking in and draining it.
domino
Well-Known Member
Sad times man.
Dopey
Well-Known Member
Is that the 3 nuts at the front of the pic?
If it is, you have to de-solder them, and clean them (using leaded solder) with a copper braid to get all the solder off, then get some lead based solder (Flows better) then tin the pads, and apply the solder on the pads, and solder them on
Yes the 3 underneath the fuse box labelled bcm 1 2 and 3.
Seems like a mammoth task to split the 2 halves, well above my pay grade
They do look like nuts, but soldered from the other side
Dopey
Well-Known Member
Hmmm Bu**er
Dopey
Well-Known Member
I am surprised, she said keep it, because she knows how much it means to me, can't fault herThought you had managed to “man math” it to the boss.
Shame after all your work.
J
What like Now? After you said you gonna sell it?
So it’s not for sale then
She’s a keeperWhat’s she just bought
J
tomcat59alan
Well-Known Member
@biketeacherdave did mine due to my loss of dexterity, your best sniping through the pins so the "sandwich " can be opened up then resoldered after the repair. May be worth a pm if you don't fancy trying it. Could be a full-time job Dave.
When I was in the trade a looooong time ago I used a solder sucker and found it better than the braid.
You've lost me, what is braided?
Snipping sounds like a good plan!! I do wonder how brittle the fold is though@biketeacherdave did mine due to my loss of dexterity, your best sniping through the pins so the "sandwich " can be opened up then resoldered after the repair. May be worth a pm if you don't fancy trying it. Could be a full-time job Dave.
