One other thing, I see you have hand painted the door frame with primer. Are you intending painting the panels with primer by hand also? Then the colour by hand or spray?
I have painted car parts before.....however nothing like a landy.
The method I used ( not including all the sanding and prep work ect ) was primer x3, colour x6-8, clear laquer x3.
This seemed to come out ok, however Im not sure a landy really requires the same standard as a modern car, do people even laquer them for instance?
What do most people do and recomend?
I have a compressor and spray guns....and brushes and rollers lol
 
i can clearly see you work to an exeptionaly high standard because of wich i just gotta ask do you do landy rebuilds for a livving or is it a long standing passion coz im loveing this thread and reading with serious enthusiasm cant wait to see her finnished
regards john
 
she needs to tie him to that toolchest hes got we'd probably see plenty of action then
still a hell of a project though if it ever gets finished i can imagine its gonna be a real show stopper the way hes going at it
regards john
 
evening all, not been on fer a few months , with everything else, iv been up to me neck with other work so the poor old series 2s been put on hold , works gettin quiet agan now fer a bit so should be on with the chassis swap .

galvo chassis from richards is on order , 8 - 10 weeks to wait :( ah well will be nice when it turns up :)

will give me few weeks to strip all the body parts back to bare metal and weld up the bulk head and front panel ,

as for the repainting of the ally body , its going off to a professional spray shop :)

thanks for all the positive feed back folks, should be showin me face a bit more now everythings sorted out :)

as fer the tool chest ..................... iv gorra bigger one now ;)

pics to come next week or so
 
evening all, not been on fer a few months , with everything else, iv been up to me neck with other work so the poor old series 2s been put on hold , works gettin quiet agan now fer a bit so should be on with the chassis swap .

galvo chassis from richards is on order , 8 - 10 weeks to wait :( ah well will be nice when it turns up :)

will give me few weeks to strip all the body parts back to bare metal and weld up the bulk head and front panel ,

as for the repainting of the ally body , its going off to a professional spray shop :)

thanks for all the positive feed back folks, should be showin me face a bit more now everythings sorted out :)

as fer the tool chest ..................... iv gorra bigger one now ;)

pics to come next week or so

Welcome back Trucky......someone said you was dead.......or had been worn out, can't remember which:D:D:D
 
evening all,

the bare bulkhead and grill panel have come back from the shotblasters today , front panel only needng the bottom rail replacing and a few blobs of weld to seal a couple of pin holes and unused fixing holes,

the bulkhead requiring a little more in places, the usual , footwells, central tunel , door pillar bottoms and feet, nothing too serious considering the age ,

pics to come later when me cameras charged again ,

still not been doing a lot as part way thru moving workshops etc, chassis is on its way in next two weeks :)
 
Thought you'd gone and got trapped again.....did I tell you I got a car in me garage....in one piece
 
Thought you'd gone and got trapped again.....did I tell you I got a car in me garage....in one piece


think you did mention somethin about havin a clear out ! :eek:

i shifted those blue series 2 panels of yours today , and the truckcab, taken them down the unit, ready for stripping , shiftin the old chassis down there monday too, ordered the sections so will build a nce second project out of it later next year , not to the same quality as this ser2 am affraid, but a decent every day runner,

so ........ more to the point si, :rolleyes: did yer get chance to paint this ere motor or what ?
 
Tell you what fella, this is the best thread on the net.
When I win the lotterey, you can build my workshop for me!

Cheers mate :) as for the workshhop , iv just had to start renting another as iv run out of space, :D

Will be uploading some pics in morning so watch this space .........
 
well, bulkheads back from the shotblaster

DSC00526.jpg


been and colected a few bits too

DSC00527.jpg


cut all the rott out of the front panel and replaced it with ACTUAL metal ;)

DSC00525.jpg


nothing to weld to realy

DSC00524.jpg


ah well , looks lot better for it

DSC00529.jpg


bit of red oxide primer

DSC00530.jpg


nice

DSC00531.jpg
 
And one side of yer 110 ;)

Be ok when the next few coats go on, tis only primer after all . Be even worse if I did it with a brush :D
 
And one side of yer 110 ;)

Be ok when the next few coats go on, tis only primer after all . Be even worse if I did it with a brush :D

I blame the paint.....how the hell you get the orange peel effect with a roller is beyond me....feckin stuff:D
 

Similar threads