danchapman2k2
Well-Known Member
well i was drying my landy out a week ago and came across a number of holes in my N/S Footwell - anyway there is one to the left about 80mm high and 20mm wide which is in the lower part which dips down on the footwell. as well as the same size at the bottom and also a 50pence peice hole in the centre.
I have looked around etc. but am wondering a couple of things on what to do. Do i
A: Make a panel for each whole knock the rust off and weld in
or
B: GO and buy a new N/S repair footwell panel and put it in over the top?
What do you reckon guys
I have looked around etc. but am wondering a couple of things on what to do. Do i
A: Make a panel for each whole knock the rust off and weld in
or
B: GO and buy a new N/S repair footwell panel and put it in over the top?
What do you reckon guys