R6NGC

R6NGC

New Member
Forum Sponsor
If anyone has one please contact me............OR.............Does anyone know if the 'plug thread - sleeve can be re fixed in as although my rad is good the threaded filler keeps coming out.

Cheeres,

Al.
 
Hi,

Thanks for your reply.

I am in the Midlands, near Wolverhampton M6 J.11 So quite a way I think.....

Let me know what you want for it as it might be worth it.

Cheers,

Al.
 
How's £35 sound? It was cooling a 19J until today, all in good working order.

A pity about the timing, I was in Malvern 2 weeks ago.

I don't know about shipping costs, haven't shipped anything yet.
Cheers
 
Yep that is fine thanks.

I just need to make sure it's the right one because it was in my Defender which has a 3.5 RR engine in it.........The rad was in it when I bought it and I have been told it's a 2.5 TD rad with the oil cooler down the side.

Can I get a couple of pics and measure it tomorrow just to make sure with you?

If you have a pic / measurements please send them....thank you.

I will have to see how much collection ius or see if anyone is coming this way....

Alan.
 
There's no oil cooler on this one! Photo attached.
 

Attachments

  • P1050617.JPG
    P1050617.JPG
    80.9 KB · Views: 131
flatlander said:
How's £35 sound? It was cooling a 19J until today, all in good working order.

A pity about the timing, I was in Malvern 2 weeks ago.

I don't know about shipping costs, haven't shipped anything yet.
Cheers
Click to expand...

Really!?!?!

Ironically i have one but two of the pins are missing. I am comin north in a fortnight.
 
As I said, there is no oil cooler on this one. It was an early 19J, and the oil filter housing seems to be cooled by the main cooling system.
 
It looks the same but without the oil cooler down the right hand side from your photo's angle??

I could probably get it mounted an buy an oil cooler seperately? I will have to measure it tomorrow as it's a tight squeeze...
 
I have one in good nick with oil cooler. You would have to just cut off two pins from your old one and spot weld on. I am coming your way in two weeks. Away next week.
 
Here you go. There were no leaks when took off 3 weeks ago. Light Brown bits are just dust from being in shed and i do joinery in there.lol
 

Attachments

  • uploadfromtaptalk1342803605585.jpg
    uploadfromtaptalk1342803605585.jpg
    83.7 KB · Views: 124
  • uploadfromtaptalk1342803617414.jpg
    uploadfromtaptalk1342803617414.jpg
    74.7 KB · Views: 135
Chunky's looks a much better bet, and he's on your doorstep, almost:)

Chunky, When I've gotten the 200 into my 90 I plan on driving it over to Malvern to meet my mate with a Series 1. Perhaps meet for a pint?
 
You must log in or register to reply here.

Similar threads

ryan_1993
Fitting a new engine loom 300 tdi
Replies
0
Views
425
ryan_1993
ryan_1993
dag019
Capstan winch information required please
2
Replies
24
Views
3K
steve2286w
steve2286w
DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
742
DollyBird
DollyBird
dag019
A question of gearboxes
Replies
16
Views
820
Skolmate
Skolmate
A
Freelander 1 Now we are 2.
Replies
19
Views
961
Alex1000
A