S2aalex

Member

• Jul 25, 2019

• #1

Wanted 2.25 diesel engine must be working or running. Or if pump is buggered to have a good head and block. Preferably a 3mb engine but not too worried either way. Cornwall, Devon or Somerset. I can collect.

Sorry if this is in the wrong thread!

Thank you

 

wireman

Well-Known Member

• Jul 25, 2019

• #2

The mods might move this to Wanted section.

 

wireman

Well-Known Member

• Jul 25, 2019

• #3

https://www.ebay.co.uk/itm/Land-Rov...2ad0cf5992:g:wmQAAOSwTsNdKbSd&redirect=mobile

Not mine but might be ok for what you need

 

S2aalex

Member

• Jul 25, 2019

• #4

Thank you I appreciate the look out! Looking for something a bit more up and running like a recent removal or something. But thank you all the same

 

wireman

Well-Known Member

• Jul 25, 2019

• #5

There was someone recently selling a large selection of series diesel engines on ebay but I don't know where he was in the UK or what condition they were. Have you thought of putting a 2.5 n/a out of an early 90 in? There are quite a few of those around, all runners removed for tdi conversions.

 

wireman

Well-Known Member

• Jul 25, 2019

• #6

See here

https://www.ebay.co.uk/itm/land-rov...23c1ff3229:g:bscAAOSwL-NdLxVP&redirect=mobile

 

S2aalex

Member

• Jul 25, 2019

• #7

I currently have a good working 2.5 but would rather keep the series 2A with the original style engine being the 2.25. There must be a few chaps on the forum who have removed these lumps for Tdi's and have them lying around I would imagine!

 

wireman

Well-Known Member

• Jul 25, 2019

• #8

Or this one

https://www.ebay.co.uk/itm/land-rov...1efecc9328:g:70MAAOSwzoZdOdFr&redirect=mobile

 

Last edited: Jul 25, 2019

S2aalex

Member

• Jul 25, 2019

• #9

Perfect thank you!! I'll go and check it out.

 

Chopz

Member

• Jul 25, 2019

• #10

That last ebay engine is 5mb

 

S2aalex

Member

• Jul 25, 2019

• #11

How can you tell from looking? Are there any obvious signs? I was going to ask him for the engine number and do it that way

 

Chopz

Member

• Jul 25, 2019

• #12

I can see the extra cast ribs on the bottom of the block

 

S2aalex

Member

• Jul 25, 2019

• #13

Geddon never knew that!

 

Chopz

Member

• Jul 25, 2019

• #14

It will still fit the same,just its a later engine

 

S2aalex

Member

• Jul 25, 2019

• #15

Dont think that one will be any good anyway. Looks like this chap doesn't really know what it runs like. Need an engine to just plonk straight in and off I go. Sounds picky i know!

 

Chopz

Member

• Jul 25, 2019

• #16

Most people fit a tdi because the old engine was slow and smokey
But that's just the way they are

 

S2aalex

Member

• Jul 25, 2019

• #17

Yeah precisely so someone must have one lying about! Tryna keep the old girl as original as I can, only 1 previous owner and 1963 so would be good to see it through.

 

Chopz

Member

• Jul 25, 2019

• #18

Yep I aqree
3mb it should be
I would pull one apart before putting it in
Most will be worn out and new parts are so cheap for the 2.25

 

S2aalex

Member

• Jul 25, 2019

• #19

Pulling it apart is exactly what I'm trying to avoid haha

 

R

rob1miles

Well-Known Member

• Jul 27, 2019

• #20

Unless you can hear it running I'm afraid you have to pull it apart, I know from bitter experince! You may get one where the owner videoed it before taking it out, that should do.