The broken pin is pin no1 red grey. The compressor multiplug is the connection I have issues with..can the harness side joint be remade/replaced ?
As i said there is no Red/Grey wire to datalink connector (OBDII) It is Grey/Red. Main colour Grey, tracer Red. Main colour first tracer second. You may be able to remove the spades and tighten them up. Only three wires on compressor plug. Green power, Black ground and Orange overtemp circuit. Colours to compressor socket from loom are Purple/Light green (To Green). Black/Purple (To Temp switch). Black to black, ground. Flick the inner cover out carefully you should then be able to insert a thin pin to take out the spade connectors tighten them up and put them back press cover back in. Compressor plug/socket have no connection to nor influence on OBDII connector.
Last edited: