ANDYCUK

Member
Hi guys

Trying to remove fan.

Bought removal spanner. When to undo it and nut just keeps spinning needed no pressure to loosen nut.

Still can't remove fan.

Any ideas please


Thanks
Andy
 
shock spanner with a hammer if that dont work hit each flat of nut in the center with a long flat ended punch in turn eventually nut will unscrew by hand
 
And you are turning the nut the opposite way to what you would normally do? As the thread is opposite.
 
I had to use an old belt to hold the pulley, needed a friend to hold the grips while I hung off the spanner!!

IMG_0100_zps31039252.jpg
 
Last edited:
Job best done with the belt on

300tdi opposite thread but TD5 is normal thread I believe.

If the belt is off it makes the job 100x. More difficult.
 

Similar threads