Look at the load rating.I have an RRC ,looking at "KATSU 161918 " ramp's anyone any info.? They are 305mm/12" wide so would seem suitable.
Datatek:- 7 ton per pair, tested to 12 ton per pair. Phenomenal weight for plastic/polypropylene?Look at the load rating.
Plastic? Personally I wouldn't touch them. Plastic degrades too quickly for my liking.Datatek:- 7 ton per pair, tested to 12 ton per pair. Phenomenal weight for plastic/polypropylene?
I agree about the degradation, I think it is accelerated by leaving item's in the sun! Apart from that I can't see anything else on offer with these spec's, delivered to my door for fifty sod's!Plastic? Personally I wouldn't touch them. Plastic degrades too quickly for my liking.
+1Have a search for Hippo Ramps. I made a set and they are useful in that once the car is up on the platform you can move the angled part to make access easier.
Found them for you.
https://www.landyzone.co.uk/land-rover/hipporamps-how-to-guide.257760/
I'll have to post a photo of mine, of course being a joiner/cabinet maker they are a lot rougher than yours
HippoRamps (TM) are real. We ain't joking. Follow the link above.Are you "pair" commedian's or comedian's.
You forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.HippoRamps (TM) are real. We ain't joking. Follow the link above.
Many years ago we had a set of metal ramps. The type where yer had ter take a run up ter get the wheels over the ladder diagonal bit. Rust got to them and they were too much of a risk ter use. So eye made some ouof wood.
You forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.
My freelander is more reliable and cheaper ter run than your big freelanderYou forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.
I started this thread stating that I have an RRC. It is a 1994 " VOGUE SE 300Tdi AUTO on AIR". It is not the downstair's maid's shopping trolley ie.(freelander/evoque, etc.). Such cheek! For the " RANGE ROVER " members I have ordered the KATSU ramp's , mainly because they are lightweight. Thank's all regarding timber ramp's.My freelander is more reliable and cheaper ter run than your big freelander
Are you the upstairs maid?I started this thread stating that I have an RRC. It is a 1994 " VOGUE SE 300Tdi AUTO on AIR". It is not the downstair's maid's shopping trolley ie.(freelander/evoque, etc.). Such cheek! For the " RANGE ROVER " members I have ordered the KATSU ramp's , mainly because they are lightweight. Thank's all regarding timber ramp's.
No . I'm the one in the four poster giving the order's. Send up the milk maid . Can you comprehend?Are you the upstairs maid?