Look at the load rating.I have an RRC ,looking at "KATSU 161918 " ramp's anyone any info.? They are 305mm/12" wide so would seem suitable.
Datatek:- 7 ton per pair, tested to 12 ton per pair. Phenomenal weight for plastic/polypropylene?Look at the load rating.
Plastic?Datatek:- 7 ton per pair, tested to 12 ton per pair. Phenomenal weight for plastic/polypropylene?
I agree about the degradation, I think it is accelerated by leaving item's in the sun! Apart from that I can't see anything else on offer with these spec's, delivered to my door for fifty sod's!Plastic?Personally I wouldn't touch them. Plastic degrades too quickly for my liking.
+1Have a search for Hippo Ramps. I made a set and they are useful in that once the car is up on the platform you can move the angled part to make access easier.
Found them for you.
https://www.landyzone.co.uk/land-rover/hipporamps-how-to-guide.257760/
I'll have to post a photo of mine, of course being a joiner/cabinet maker they are a lot rougher than yours![]()
HippoRamps (TM) are real. We ain't joking. Follow the link above.Are you "pair" commedian's or comedian's.
You forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.HippoRamps (TM) are real. We ain't joking. Follow the link above.
Many years ago we had a set of metal ramps. The type where yer had ter take a run up ter get the wheels over the ladder diagonal bit. Rust got to them and they were too much of a risk ter use. So eye made some ouof wood.
You forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.![]()
My freelander is more reliable and cheaper ter run than your big freelanderYou forgot to add that they are a good source of kindling if you get fed up with the ribbing for owning a Gaylander.![]()
I started this thread stating that I have an RRC. It is a 1994 " VOGUE SE 300Tdi AUTO on AIR". It is not the downstair's maid's shopping trolley ie.(freelander/evoque, etc.). Such cheek! For the " RANGE ROVER " members I have ordered the KATSU ramp's , mainly because they are lightweight. Thank's all regarding timber ramp's.My freelander is more reliable and cheaper ter run than your big freelander![]()
Are you the upstairs maid?I started this thread stating that I have an RRC. It is a 1994 " VOGUE SE 300Tdi AUTO on AIR". It is not the downstair's maid's shopping trolley ie.(freelander/evoque, etc.). Such cheek! For the " RANGE ROVER " members I have ordered the KATSU ramp's , mainly because they are lightweight. Thank's all regarding timber ramp's.
No . I'm the one in the four poster giving the order's. Send up the milk maid . Can you comprehend?Are you the upstairs maid?