If it's a doozie it don't need power to run. If ignition switch plug is removed it should be ok. Possibly remove starter relay - Lhs side footwell ?
 
Evening. Just got message from MHM.
I can help in the morning, on call tonight and can't venture over.
If you want me it's best to text me so get the number of one of the LZIR admin boys.
 
Evening. Just got message from MHM.
I can help in the morning, on call tonight and can't venture over.
If you want me it's best to text me so get the number of one of the LZIR admin boys.

Anytime after 5.30am then :D
 
there's not enough info.

check the wire from the pos bat to the starter motor.. has that melted and shorted against something? if so, use a jump cable as a temp fix.

if that isn't the case, wait until daylight. remove the pos bat term. run a thin guage wire from the pos bat to the fuel solenoid.

bump it and drive home.. being very careful as you have no lights for anything.

or if you can't bump, jump leads from pos bat to starter and short the small spade against the big lug.. it'll spark and make sure it's not in gear. also, make sure the short isn't futher up else you'll melt the jump leads.. you'll tell as they'll get hot.
 
there's not enough info.

check the wire from the pos bat to the starter motor.. has that melted and shorted against something? if so, use a jump cable as a temp fix.

if that isn't the case, wait until daylight. remove the pos bat term. run a thin guage wire from the pos bat to the fuel solenoid.

bump it and drive home.. being very careful as you have no lights for anything.

or if you can't bump, jump leads from pos bat to starter and short the small spade against the big lug.. it'll spark and make sure it's not in gear. also, make sure the short isn't futher up else you'll melt the jump leads.. you'll tell as they'll get hot.

see post #38 :)
 
It starts with no keys in the ignition ! When I hold the fuse in but make a grinding
Noise while ticking over .
 
I'm not an expert, but couldn't you just put the fuse in so it starts, then disconnect the starter motor?
 

Similar threads