blue beasty
Leaks an prone to bits dropping off
Btw we now have location and contact number if anyone can assist.
blue beasty
Leaks an prone to bits dropping off
Don't try jumping you need to bump if we can get you some fuses.
blue beasty
Leaks an prone to bits dropping off
Come on then folks who can rustle up a couple of 60amp fuses (one at a push) and take them over?
blackstrat
Well-Known Member
I'm 3hrs away but have a free evening so I'll go if nobody else can..
blue beasty
Leaks an prone to bits dropping off
I'm guessing maxi blade like this
Last edited:
blue beasty
Leaks an prone to bits dropping off
blue beasty
Leaks an prone to bits dropping off
can you confirm MM?
On a disco it's a block fuse.
blue beasty
Leaks an prone to bits dropping off
Just spoken to MM on the phone and it sounds a bit more involved unfortunately.
He has a fuse but when he connects it the engine turns over with the ignition off so to me it sounds likely that ignition switch or part of the loom has melted. Has no power to anything else in the cab.
Have advised calling the AA for recovery but he would very much appreciate if anyone is close and knows there way around a few wires went and had a look
He has a fuse but when he connects it the engine turns over with the ignition off so to me it sounds likely that ignition switch or part of the loom has melted. Has no power to anything else in the cab.
Have advised calling the AA for recovery but he would very much appreciate if anyone is close and knows there way around a few wires went and had a look
blue beasty
Leaks an prone to bits dropping off
Yes, spot on. He has one that works.
Remove connector from back of ignition switch.
Run wire from battery to fuel cut off switch and bump it?
Run wire from battery to fuel cut off switch and bump it?
blue beasty
Leaks an prone to bits dropping off
That's me out then
Hope you get sorted mate
Pm'd you MMs number in case anyway
